MINI MINI MANI MO
/ Copyright (c) 2010, 2017, Oracle and/or its affiliates. All rights reserved.
/
/ NAME
/ asmcmdus.msg
/
/ DESCRIPTION
/ Error messages for ASM CoMmanD line interface (ASMCMD)
/
/ NOTES
/
/ MODIFIED
/ anovelo 04/17/17 - Add argument indexing
/ emsu 03/10/17 - 25497063: Add 9479 for mkcc
/ anovelo 01/23/17 - 25397926: Add 8038
/ siyarlag 01/11/17 - Bug/24939841: update 9520 message
/ emsu 10/19/16 - 24760407: Add 9478, 9499, 9500 for mkcc
/ anovelo 11/16/16 - 12640351: Add 8037
/ diguzman 10/12/16 - 10219399: update Cause of 8005
/ diguzman 09/02/16 - 24570890: rewrite 9531
/ anovelo 08/18/16 - 24469683: Add 9392
/ abhmanju 07/11/16 - sparse merge: add 8030, 8031, 8032, 8033, 8034
/ 8035 and 8036
/ diguzman 06/22/16 - 23623646: add 8029
/ emsu 04/27/16 - 21537310: Add 9496 and 9497 for lscc
/ samjo 04/18/16 - 23119825: Add 9498 and 9546 for mkcc
/ ssprasad 04/13/16 - Bug/23100725: Add 9545 for AFD driver mismatch state
/ diguzman 04/12/16 - 22600475: add 8609. 22562654: add 8610 and 8611
/ siyarlag 03/14/16 - Bug/22883274: Add 9544 AFD command not supported
/ anovelo 03/09/16 - 22897600: Add 9464 for pwcreate
/ diguzman 03/08/16 - 22752719: remove 8606, 8607; add 8608
/ kmatkar 02/01/16 - Add 9386 for chblk
/ abhmanju 01/29/16 - Bug 21275171 and 21172775: add 8015, 8017, 8018
/ and 8019 for setsparseparent
/ samjo 01/27/16 - Bug 19404447: Client Cluster --> member cluster
/ emsu 01/26/16 - rti18960899: Repurpose 9540 for stamp
/ emsu 01/25/16 - 22375430: Add 9494 and 9495 for mkcc
/ jesugonz 12/07/15 - 22330738: add 9543 for chdg
/ mnollen 10/28/15 - 21569440: Add 9362-9368 for acfs metadata backup
/ restore.
/ emsu 10/23/15 - 21864926: Add 9493 for mkcc/rmcc
/ kmatkar 09/28/15 - Add ASMCMD 9385 for mrkrcvd
/ jesugonz 09/09/15 - 21129410: Add 9541, 9542
/ siyarlag 07/01/15 - Bug/21244596: add ASMCMD 9533
/ emsu 06/24/15 - 20732199: Add 9492 for lscc
/ emsu 06/19/15 - 21044453: Add 9489, 9490, 9491 for lscc
/ siyarlag 04/03/15 - Bug/20678151: add ASMCMD 9531
/ siyarlag 04/03/15 - Bug/19700132: add ASMCMD 9530
/ diguzman 03/20/15 - 20655494: Add 9531
/ diguzman 03/13/15 - 20678151: add ASMCMD 9530
/ prabbala 01/30/15 - 20101171: add ASMCMD 9529
/ hppancha 03/27/14 - bug11634278: Add error messages for mkcc and rmcc
/ siyarlag 05/22/14 - Bug/18812974: add afd_filter messages
/ siyarlag 05/01/14 - add AFD configure error messages
/ pvenkatr 01/30/14 - Bug # 18136383, 17902992 - AFD related cmd msgs
/ pvenkatr 01/24/14 - Added 9486 - "cmd" requires "Privilege"
/ diguzman 01/23/14 - add 8607
/ arpsriva 01/20/14 - Bug 14014671- add 8026, 8027, 8028.
/ pvenkatr 01/16/14 - Added 9485 - SYSASM required for SPFILE operations
/ diguzman 11/26/13 - add 8606
/ diguzman 08/26/13 - add 8605
/ diguzman 06/28/13 - add 8604
/ gmengel 05/06/13 - add 8024, 8025.
/ averhuls 01/04/13 - add 8558, 8559.
/ averhuls 06/20/12 - Add ASMCMD proxy errors.
/ adileepk 05/08/12 - Fix for bug-14000743.
/ adileepk 03/09/12 - Fix for bug-13822763.
/ shmubeen 09/07/11 - adding cause and action for msgs from 8319-9347
/ moreddy 07/09/11 - Bug12818129 add cause and action
/ mchimang 09/05/11 - Add missing cause action.
/ sshankav 08/24/11 - bug 12818129- adding cause and action
/ adileepk 09/26/11 - Adding error messages for ASMCMD password file
/ commands.
/ mchimang 05/16/11 - Add error msg for cp version incompatibility
/ moreddy 05/26/11 - Added 8022
/ moreddy 05/30/11 - fix bug 12603925, change -> character to space
/ adileepk 10/01/10 - Adding error codes for the parser modules.
/ moreddy 03/23/10 - Creation
/
/ General ASMCMD Errors: 08000-08099
/
8001, 1, "diskgroup '%s' does not exist or is not mounted"
// *Cause: An operation failed because the diskgroup specified did not
// exist or was not mounted by the current Oracle Automatic
// Storage Management (Oracle ASM) instance.
// *Action: Verify that the diskgroup name specified is valid, that the
// diskgroup exists, and that the diskgroup is mounted by
// the current Oracle ASM instance.
/
8002, 2, "entry '%s' does not exist in directory '%s'"
// *Cause: The specified path contained elements that did not exist.
// *Action: Specify an existing Oracle ASM file path.
/
8003, 1, "command disallowed by current instance type"
// *Cause: ASMCMD was connected to an instance with an instance type other than
// Oracle Automatic Storage Management (Oracle ASM).
// *Action: Ensure you are connecting to an instance whose INSTANCE_TYPE
// parameter is Oracle ASM.
/
8004, 1, "Oracle ASM file path '%s' contains an invalid alias name"
// *Cause: The path specified contained an invalid alias name.
// *Action: Specify a valid path.
/
8005, 1, "directory '%s' is ambiguous"
// *Cause: The directory on which the command was executed translated to
// multiple matches.
// *Action: Specify a unique directory string.
/
8006, 1, "entry '%s' does not refer to an existing directory"
// *Cause: The 'cd' command failed as the specified path did not exist.
// *Action: Specify an existing Oracle ASM file path.
/
8007, 1, "unclosed single quotation mark"
// *Cause: The input did not contain a closing single quotation mark.
// *Action: Close the single quotation mark properly.
/
8008, 2, "both source '%s' and target '%s' cannot be from remote instances"
// *Cause: The 'copy' command specified both source and target files that were on
// remote instances.
// *Action: Either the source file or the target file can be on the remote
// instance, but not both.
/
8009, 1, "more than one source file specified, one of which is remote"
// *Cause: The 'copy' command specified multiple source files, at least one of which
// was remote.
// *Action: When there are multiple source files, all of them must be on the
// local node only.
/
8010, 1, "user name is not specified in remote instance connect string '%s'"
// *Cause: The user name was not specified in the remote instance connect string.
// *Action: Specify the user name in the remote instance connect string.
/
8011, 1, "instance identifier is not specified in the remote instance connect string '%s'"
// *Cause: An instance identifier was not specified in the remote instance connect string.
// *Action: Specify an instance identifier in the remote instance connect string.
/
8012, 1, "cannot determine file type for file"
// *Cause: The file type was incompatible with the copy operation.
// *Action: Specify file types which are supported by Oracle Automatic Storage Management (Oracle ASM) such as CONTROLFILE,
// DATAFILE, etc.
/
8013, 1, "cannot determine logical block size for file '%s'"
// *Cause: During the copy operation, the logical block size of the indicated
// file could not be determined. The file is corrupted or it is an
// internal error.
// *Action: Ensure that the source and destination files are valid and retry.
// If the source and destination files are valid, contact Oracle
// Support Services.
/
8014, 1, "file '%s' does not exist"
// *Cause: The file specified did not exist.
// *Action: Specify a file that exists.
/
8015, 1, "child '%s' cannot be on remote instance"
// *Cause: The 'setsparseparent' command specified a child file that was on a
// remote instance.
// *Action: The child file cannot be on a remote instance.
/
8016, 2, "copy source '%s' and target '%s' failed"
// *Cause: The 'copy' command was not successful.
// *Action: Examine the accompanying error messages for details.
/
8017, 2, "setting parent of child '%s' to new parent '%s' failed"
// *Cause: The 'setsparseparent' command was not successful.
// *Action: Examine the accompanying error messages for details.
/
8018, 0, "more than one child file specified, one of which is remote"
// *Cause: The 'setsparseparent' command specified multiple child files, at
// least one of which was remote.
// *Action: When there are multiple child files, all of them must be on the
// local node only.
/
8019, 1, "parent '%s' cannot be on remote instance"
// *Cause: The 'setsparseparent' command specified a parent file that was on a
// remote instance.
// *Action: The parent file cannot be on a remote instance.
/
8020, 1, "could not write into trace file"
// *Cause: Writing to the trace file failed.
// *Action: Examine the accompanying error messages for details.
/
8021, 1, "password cannot contain the following characters $%%^&*()<>'\" or tab"
// *Cause: Invalid characters were found in the specified password.
// *Action: Supply a password which does not contain $%%^&*()<>'\" or tab.
/
8022, 1, "unknown command '%s' specified"
// *Cause: An unknown command was specified.
// *Action: Enter a valid command; 'asmcmd help' will list valid commands.
/
8023, 1, "copying password file using Oracle ASM requires software version '%s' or later on host '%s'"
// *Cause: A request to copy a password file was issued to an Oracle Automatic
// Storage Management (Oracle ASM) instance whose version did not
// support that operation.
// *Action: Upgrade Oracle ASM to version 12.1 or later.
/
8024, 1, "file number could not be determined for alias name '%s' "
// *Cause: The attempt to determine the file number for the specified alias
// was unsuccessful.
// *Action: Ensure that the discovery string corresponds to disks for the
// specified disk group.
/
8025, 1, "Invalid file name specified. Absolute path name is required when there is no connection to Oracle ASM instance."
// *Cause: The specified file name did not begin with '+'. It is therefore
// treated as a relative path name which requires a connection to
// Oracle Automatic Storage Management.
// *Action: Specify an absolute path name for the file you wish to extract.
// Absolute path names begin with '+<diskgroup>'.
/
8026, 1, "Password file '%s' is in use. Use the force option."
// *Cause: A password file was specified, but it is used by other resources.
// *Action: Use the force option to share the given password file with other resources.
/
8027, 1, "Password file '%s' already exists. Use the force option to overwrite."
// *Cause: An attempt to create a password file failed because it already existed.
// *Action: Use the force option to overwrite an existing password file.
/
8028, 1, "Password file '%s' is associated with '%s' already. Use the force option."
// *Cause: A password file was specified for a CRS resource, which already has
// a password file associated with it.
// *Action: Use the force option to associate new password file.
/
8029, 2, "Cannot change diskgroup redundancy from '%(1)s' to '%(2)s'"
// *Cause: The disk group redundancy must be either NORMAL or HIGH to perform this
// operation.
// *Action: Try again with a NORMAL or HIGH redundancy disk group.
/
8030, 1, "file '%s' specified with 'sparse_merge_end' cannot be on remote instance"
// *Cause: The 'copy' command with the 'sparse_merge_end' option specified
// a file that was on a remote instance.
// *Action: The file cannot be on a remote instance.
/
8031, 0, "more than one file specified with 'sparse_merge_begin' option"
// *Cause: The 'copy' command specified multiple files with the
// 'sparse_merge_begin' option.
// *Action: Multiple files cannot be specified with the 'sparse_merge_begin'
// option.
/
8032, 1, "target '%s' cannot be on remote instance"
// *Cause: The 'copy' command with the 'sparse_merge_begin' and
// 'sparse_merge_end' options specified a target file that was on a
// remote instance.
// *Action: The target file cannot be on a remote instance.
/
8033, 3, "failure merging sparse files '%(1)s' through '%(2)s' to target '%(3)s'"
// *Cause: The 'copy' command with the 'sparse_merge_begin' and
// 'sparse_merge_end' options was not successful.
// *Action: Examine the accompanying error messages for details.
/
8034, 0, "sparse merge copy operation failure due to incorrect command syntax"
// *Cause: The 'copy' command with the 'sparse_merge_begin' and
// 'sparse_merge_end' options was not successful due to incorrect
// command syntax.
// *Action: Check command line help for the correct syntax.
/
8035, 1, "file specified with sparse_merge_begin and sparse_merge_end are the same - '%s'"
// *Cause: The 'copy' command specified same files for both the
// 'sparse_merge_begin' and 'sparse_merge_end' options.
// *Action: Make sure files specified with the 'sparse_merge_begin' and
// 'sparse_merge_end' options are different.
/
8036, 1, "file '%s' specified with 'sparse_merge_begin' cannot be on remote instance"
// *Cause: The 'copy' command with the 'sparse_merge_begin' option specified
// a file that was on a remote instance.
// *Action: The file cannot be on a remote instance.
/
8037, 1, "invalid system alias root path name '%s'"
// *Cause: An invalid system alias root path name was specified.
// *Action: Ensure that the 'dest_dbname' option is a non-null value and has
// only alphanumeric characters.
/
8038, 1, "invalid path to ASM system file name '%s'"
// *Cause: An invalid file path to an ASM system file name was specified.
// *Action: Ensure that the provided ASM file name is not an alias, and that it
// points to an existing file. An ASM system file name follows the
// format <name>.<file_number>.<incarnation>.
/
/ Non-exception SQL errors: 8100-8199
/
8102, 1, "no connection to Oracle ASM; command requires Oracle ASM to run"
// *Cause: A command that requires Oracle Automatic Storage Management
// (Oracle ASM) processing was issued but there was no
// connection to an Oracle ASM instance.
// *Action: Start the Oracle ASM instance and retry the command.
/
/ Exceptions: 8200-8299
/
8201, 1, "Oracle ASM not available\n %s"
// *Cause: During a copy operation, connection to the Oracle Automatic Storage
// Management (Oracle ASM) instance on the remote node failed.
// *Action: Check ASMCMD alert log for more information.
/
8202, 1, "internal error: %s"
// *Cause: There was an internal error.
// *Action: Contact Oracle Support Services.
/
/ Instance Management: 8300-8350
/
8303, 1, "invalid SPFILE '%s'"
// *Cause: The specified server parameter file did not have a valid file type,
// a valid file size, or a valid block size.
// *Action: Specify a valid server parameter file.
/
8305, 1, "GPNPTOOL executable not found at '%s'"
// *Cause: The GPNPTOOL executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
/
8306, 1, "could not edit the GPnP profile"
// *Cause: A 'gpnptool edit' command failed.
// *Action: Examine the accompanying error messages for details.
/
8307, 1, "could not sign the GPnP profile"
// *Cause: A 'gpnptool sign' command failed.
// *Action: Examine the accompanying error messages for details.
/
8308, 1, "-f option cannot be used when Oracle Clusterware stack is up"
// *Cause: The force option was supplied when the Oracle Clusterware stack was up.
// *Action: Remove the force option and retry.
/
8309, 1, "could not check the status of cluster"
// *Cause: The command 'crsctl check css' failed.
// *Action: Examine the accompanying error messages for details.
/
8310, 1, "could not get the GPnP profile sequence number"
// *Cause: An error occurred while retrieving the sequence number of the GPnP
// profile.
// *Action: Examine the accompanying error messages for details.
/
8313, 1, "CRSCTL executable not found at '%s'"
// *Cause: The CRSCTL executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
/
8314, 1, "could not set the disk string"
// *Cause: The command 'srvctl modify asm -d <diskstring>' failed.
// *Action: Examine the accompanying error messages for details.
/
8315, 1, "could not determine the mode in which Oracle Clusterware is running"
// *Cause: The command 'crsctl status resource ora.crsd -init -g' failed.
// *Action: Examine the accompanying error messages for details.
/
8316, 1, "SRVCTL executable not found at '%s'"
// *Cause: The SRVCTL executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
/
8317, 1, "could not get the Oracle ASM disk string"
// *Cause: The command 'srvctl config asm' to get the Oracle Automatic Storage
// Management (Oracle ASM) disk string failed.
// *Action: Examine the accompanying error messages for details.
/
8318, 1, "environment variable '%s' not set"
// *Cause: The environment variable HOSTNAME was not set before running this command.
// *Action: Set the variable HOSTNAME and retry.
/
8319, 1, "could not locate the GPnP profile"
// *Cause: The Grid Plug and Play (GPnP) profile did not exist.
// *Action: Contact Oracle Support Services.
/
/ File Access Control: 8401-8450
/
8402, 1, "operation was not performed on the file %s"
// *Cause: Altering the diskgroup to change the owner, group, or permissions
// failed.
// *Action: Examine the accompanying error messages for details.
/
8406, 1, "cannot accept null password"
// *Cause: A null password was passed.
// *Action: A non-null password must be entered.
/
8409, 1, "'chmod' operation not allowed for %s"
// *Cause: A 'chmod' command specified the write-only permission.
// *Action: Specify a permission other than write-only and retry the command.
/
/ Errors
/
/ Volume Management 8551-8600
/
8552, 1, "invalid diskgroup name '%s'"
// *Cause: An invalid diskgroup name was specified.
// *Action: Ensure that the command's -G option has a non-null value passed and has only
// alphanumeric characters.
/
8554, 1, "invalid volume name '%s'"
// *Cause: An invalid volume name was specified.
// *Action: Ensure that the volume name is a non-null value and has only alphanumeric
// characters.
/
8557, 2, "diskgroup '%s' volume '%s' not found"
// *Cause: The specified diskgroup or volume was not found.
// *Action: Specify a valid diskgroup and volume.
/
8558, 2, "invalid size multiplier specified"
// *Cause: An invalid size multiplier was specified.
// *Action: Specify a numeric volume size terminating in 'K', 'k', 'M', 'm', 'G', 'g', T',or 't'.
/
8559, 2, "invalid size specified"
// *Cause: The size specified contained a valid size multiplier but contained other non-numeric characters.
// *Action: Specify a numeric volume size terminating in 'K', 'k', 'M', 'm', 'G', 'g', T',or 't'.
/
/ Analyze errors
/
8601, 1, "could not create the analyze directory"
// *Cause: An internally issued 'mkdir' command failed to create the analyze directory.
// *Action: Examine the accompanying error messages for details.
/
8602, 1, "time stamp format is not recognized"
// *Cause: The format for time stamp was invalid.
// *Action: Specify a time stamp in the following format: Mon Sep 19 19:56:15 2011.
/
8603, 1, "invalid value specified for 'tracedirectory'"
// *Cause: The specified trace directory did not exist.
// *Action: Supply a valid trace directory which contains the set of logs and
// trace files that need to be analyzed.
/
8604, 1, "Start time is later than end time. Please specify end time later than start time."
// *Cause: Inconsistent values for --startime and --endtime options.
// *Action: Please specify the value of --endtime option later than the value of
// --starttime option
/
8605, 1, "cannot read the event list file.\n"
// *Cause: The event list file did not exist or could not be read
// *Action: Check if the file asmevents.xml exists under $ORACLE_HOME/lib
// and you have read permissions.
/
8608, 1, "invalid value for '%s' option: %s"
// *Cause: The provided value was not valid for the specified option.
// *Action: Correct the value and retry the command.
/
8609, 1, "file group '%s' does not exist"
// *Cause: The specified file group name did not exist.
// *Action: Specify the name of an existing file group.
/
8610, 1, "cannot access '%s', no such XML file"
// *Cause: The specified file did not exist.
// *Action: Specify the name of an existing file.
/
8611, 1, "cannot read '%s', permission denied"
// *Cause: Permission to read the specified file was not granted.
// *Action: Grant read permission for the file and retry.
/
/Template errors
/
9001, 1, "hello, here is your argument: '%s'"
// *Document: NO
// *Cause: Internal error.
// *Action: Nothing.
/
/ Metadata Backup: 9345-9370
/
9345, 2, "could not open intermediate file '%s'\n"
// *Cause: During Oracle Automatic Storage Management (Oracle ASM) metadata
// backup operation, an attempt to open the intermediate file failed.
// *Action: Supply an existing file that can be read and written to by the
// current user.
/
9347, 1, "invalid intermediate file '%s'"
// *Cause: The intermediate file did not begin with string '@diskgroup_set'
// or there was an error while evaluating the file contents.
// *Action: Ensure that the intermediate file begins with '@diskgroup_set' or
// contact Oracle Support Services.
/
9349, 1, "diskgroup '%s' not discovered by Oracle ASM instance; skipping..."
// *Cause: A non-existent diskgroup was specified during execution of the
// 'md_backup' command.
// *Action: Specify a valid diskgroup and retry the command.
/
9350, 1, "diskgroup '%s' not mounted by Oracle ASM instance; skipping..."
// *Cause: The diskgroup specified was not mounted in an Oracle Automatic
// Storage Management (Oracle ASM) instance.
// *Action: Mount the diskgroup in the Oracle ASM instance and retry the command.
/
9351, 1, "Oracle ASM instance has no diskgroup mounted"
// *Cause: Oracle Automatic Storage Management (Oracle ASM) instance had no
// diskgroups mounted.
// *Action: Mount the diskgroups to be backed up and retry the command.
/
9352, 1, "CREATE DISKGROUP failed\n%s"
// *Cause: SQL command execution failed.
// *Action: Fix the error in the SQL command and retry the command.
/
9353, 1, "ADD or ALTER TEMPLATE failed\n%s"
// *Cause: SQL command execution failed.
// *Action: Fix the error in the SQL command and retry the command.
/
9354, 1, "ADD ALIAS failed\n%s"
// *Cause: SQL command execution failed.
// *Action: Fix the error in the SQL command and retry the command.
/
9355, 1, "could not find information for diskgroup '%s' in backup file"
// *Cause: Information about the diskgroup specified was not present in the
// backup file.
// *Action: Check that the correct diskgroup name and the backup file are
// specified and retry the command.
/
9356, 1, "backup file '%s' is either empty or cannot be interpreted"
// *Cause: Incorrect backup file was specified.
// *Action: Specify a non-empty backup file.
/
9357, 1, "file with name '%s' already exists"
// *Cause: The specified file already exists.
// *Action: Change the file name and retry the command.
/
9358, 1, "source and target files are the same - '%s'"
// *Cause: The source and target file were the same.
// *Action: Make sure the source and target files are different.
/
9359, 1, "invalid diskgroup name '%s' specified in override options"
// *Cause: The old diskgroup name specified in the override options was not found
// in the backup file.
// *Action: Correct the diskgroup name and retry the command.
/
9360, 1, "ADD or ALTER ATTRIBUTE failed\n%s"
// *Cause: SQL command execution failed.
// *Action: Fix the error in the SQL command and retry the command.
/
9361, 1, "backup version not supported\n%s"
// *Cause: The COMPATIBLE.ASM value of the diskgroup in the backup file was
// greater than the Oracle Automatic Storage Management (Oracle ASM)
// instance version executing the command.
// *Action: Upgrade the Oracle ASM instance and retry the command.
/
9362, 1, "ADD or ALTER VOLUME failed\n%s"
// *Cause: SQL command execution failed.
// *Action: Fix the error in the SQL command and retry the command.
/
9363, 0, "disk group containing auxiliary volume not found"
// *Cause: Disk recovery log did not exist.
// *Action: Use the --silent option to create volume with no recovery log disk group.
// Use the --full or -G option and restore disk recovery log.
/
9364, 2, "volume device for VOLUME: '%s' in DG: '%s' does not exist"
// *Cause: Volume was not restored or was not listed for restore.
// *Action: Create volume with the given volume name in the given disk group.
/
9365, 1, "failed to make file system\n%s"
// *Cause: The command execution failed.
// *Action: Fix the error in the mkfs command.
/
9366, 2, "invalid user name '%s' specified for %s"
// *Cause: The specified user name did not exist on the host.
// *Action: Create a local system user with the specified user.
/
9367, 2, "invalid group name '%s' specified for %s"
// *Cause: The specified group name did not exist on the host.
// *Action: Create a local system group with the specified group.
/
9368, 0, "ACFS is not loaded"
// *Cause: ACFS was not loaded.
// *Action: Contact Oracle Support Services.
/
/ Disk Operations: 9371-9400
/
9371, 2, "disk '%s' does not exist in diskgroup '%s'"
// *Cause: The disk specified was not part of the diskgroup.
// *Action: Correct the disk name and retry the command. The disk name must
// match the NAME column in the V$ASM_DISK view.
/
9372, 2, "physical blocks %s-%s do not map to a valid Oracle ASM file"
// *Cause: The physical blocks specified were not part of any Oracle Automatic
// Storage Management (Oracle ASM) file.
// *Action: Correct the range of the physical block numbers and retry the
// command.
/
9373, 2, "not all physical blocks submitted for remapping"
// *Cause: An attempt to submit all of the physical blocks for remapping failed.
// *Action: Examine the accompanying error messages for details.
/
9374, 1, "KFED executable not found at '%s'"
// *Cause: The KFED executable was not found at the indicated location.
// *Action: Run these commmands if using Oracle 10.2 or later:
// cd $ORACLE_HOME/rdbms/lib
// make -f ins_rdbms.mk ikfed
//
// Run these commmands if using Oracle 10.1:
// cd $ORACLE_HOME/rdbms/lib
// mv ssskfeded.o sskfeded.o
// make -f ins_rdbms.mk $ORACLE_HOME/rdbms/lib/kfed
// mv kfed ../../bin/
//
// Verify that $ORACLE_HOME/bin/kfed exists and has the
// execute permission bit set.
/
9375, 2, "error occurred when executing\n %s\n\n%s"
// *Cause: The 'lsdsk' command was not successful.
// *Action: Fix the error indicated in the accompanying messages and retry the
// command.
/
9378, 2, "scanning of disk headers is supported on UNIX platforms only"
// *Cause: The 'lsdsk' command failed because scanning of disk headers is
// supported on UNIX platforms only.
// *Action: Start the Oracle Automatic Storage Management instance and retry
// the command without the -I option.
/
9381, 1, "'remap' command requires Oracle ASM software version %s or later."
// *Cause: The Oracle Automatic Storage Management (Oracle ASM) instance
// did not support the 'remap' command.
// *Action: Upgrade the Oracle ASM instance and retry the command.
/
9382, 2, "physical blocks %s-%s map to an unmirrored file"
// *Cause: Oracle Automatic Storage Management (Oracle ASM) couldnot remap
// an unmirrored file.
// *Action: Specify physical blocks which map to a mirrored file.
/
9383, 1, "'mapextent' command requires Oracle ASM software version %s or later"
// *Cause: The Oracle Automatic Storage Management (Oracle ASM) instance did not
// support the 'mapextent' command.
// *Action: Upgrade the Oracle ASM instance and retry the command.
/
9384, 1, "'mapau' command requires Oracle ASM software version %s or later"
// *Cause: The current Oracle Automatic Storage Management (Oracle ASM) version
// did not support this command.
// *Action: Upgrade to 11g Release 2 or a later version.
/
9385, 1, "'lsblk' command requires Oracle ASM software version %s or later"
// *Cause: The current version of Oracle Automatic Storage Management (Oracle ASM)
// instance did not support this command.
// *Action: Upgrade Oracle ASM to 12.2 or a later version and retry the command.
/
9386, 1, "'chblk' command requires Oracle ASM software version %s or later"
// *Cause: The current version of Oracle Automatic Storage Management (Oracle ASM)
// instance did not support this command.
// *Action: Upgrade Oracle ASM to 12.2 or a later version and retry the command.
/
9390, 1, "invalid XML tag '%s'"
// *Cause: An invalid XML tag was specified.
// *Action: Check the value of the tag to ensure it is valid and retry.
/
9391, 1, "invalid XML file"
// *Cause: Certain parameters were not defined or had invalid values in the
// file.
// *Action: Check whether the required parameters are defined in the file and
// retry.
/
9392, 1, "provided XML file cannot be read"
// *Cause: The provided XML file could not be read.
// *Action: Check reading permissions on the XML file and retry.
/
9395, 1, "error parsing XML file: %s"
// *Cause: An error occurred while parsing the XML file.
// *Action: Contact Oracle Support Services.
/
9398, 1, "element %s is empty"
// *Cause: No disks were found in the element.
// *Action: Add disks to this element and retry.
/
9399, 1, "argument '%s' is not a valid number"
// *Cause: A numeric value was expected in the argument.
// *Action: Change the argument to a numeric value.
/
/ ASMCMD Command parser: 9401-9412
/
9401, 1, "command syntax error"
// *Cause: Incorrect command syntax was specified.
// *Action: Refer to the command line help or to the documentation to determine
// the correct syntax and options.
/
9412, 1, "Invalid option: %s"
// *Cause: An invalid option was specified.
// *Action: Refer to the command line help or to the documentation to determine
// the correct syntax and options.
/
/
/ ASMCMD Password file commands: 9450-9469
/
9450, 1, "missing '--dbuniquename' or '--asm' option for password file located on a diskgroup"
// *Cause: When trying to update the CRSD resource for a password file located
// on a diskgroup, the '--dbuniquename' parameter or the '--asm' option
// was not specified.
// *Action: Execute the command again with the '--dbuniquename' parameter if the
// password file is a database password file. If the password file is
// an ASM password file, then execute the command with '--asm' option.
/
9451, 1, "'orapwd' executable was not found at '%s'"
// *Cause: 'orapwd' executable was not found at the location.
// *Action: Ensure that the executable is present at the location and
// executable permissions are set.
/
9452, 1, "The password file was not found at '%s' or the path specified does not exist."
// *Cause: The password file could not be located at the specified path or
// the path to the password file did not exist.
// *Action: Ensure that the path specified is valid and that the password file
// is present at that location.
/
9453, 1, "failed to register password file as a CRS resource"
// *Cause: An internally issued 'srvctl' command to register the password file
// as a CRS resource failed.
// *Action: Respond based on the accompanying error messages.
/
9454, 1, "could not create new password file"
// *Cause: An internally issued 'orapwd' command to create the password file
// failed.
// *Action: Respond based on the accompanying error messages.
/
9455, 1, "location for the new password file was not valid"
// *Cause: An invalid path was specified to create the password file.
// ASMCMD can be used to create password files only on disk groups.
// *Action: Specify a location on a disk group for the password file and make
// sure the disk group is mounted.
/
9456, 1, "password file should be located on an ASM disk group"
// *Cause: An invalid path for the password file was specified.
// The password file should be located on an ASM disk group.
// *Action: Specify a valid location on a disk group for the password file and
// make sure the disk group is mounted.
/
9457, 1, "an internally issued srvctl command failed with errors"
// *Cause: An internally issued 'srvctl' command failed. The location of the
// password file could not be retrieved from the Cluster Ready
// Services (CRS) resource.
// *Action: Respond based on the accompanying error messages.
/
9458, 1, "user tried to move a password file within Operating System file system"
// *Cause: ASMCMD 'pwmove' or 'pwcopy' was used to move a password file to a
// different location on an Operating Systen file system. This action
// is not supported by the command.
// *Action: Ensure that ASMCMD pwmove and pwcopy commands are not used to move
// password files within OS filesystems.
/
9459, 1, "user tried to move or copy a password file within the same disk group"
// *Cause: ASMCMD 'pwmove' or 'pwcopy' command was used to move or copy a
// password file within the same disk group. This action is not
// supported by the command.
// *Action: Ensure that ASMCMD pwmove and pwcopy commands are not used to move
// or copy password files within the disk group.
/
9460, 1, "ASMCMD '%s' command was used on a file which is not a password file"
// *Cause: This particular ASMCMD command was used on a file which is not a
// password file. This command supports only operations on password
// files.
// *Action: Ensure that the file specified is a password file.
/
9461, 1, "invalid password file '%s'"
// *Cause: The specified password file did not have a valid file type,
// a valid file size, or a valid block size.
// *Action: Specify a valid password file.
/
9462, 1, "could not delete password file"
// *Cause: An internally issued 'orapwd' command to delete the password file
// failed.
// *Action: Respond based on the accompanying error messages.
/
9463, 1, "operation failed due to lack of write permissions"
// *Cause: An ASMCMD command failed because the user lacks write permissions
// necessary for the operation. Either the target directory or file
// does not have write permissions or the target already exists and
// cannot be overwritten.
// *Action: Specify a different target or modify the permissions for the target.
/
9464, 1, "invalid format for password file"
// *Cause: The specified format for the password file was not valid.
// *Action: Specify a valid format for the password file, for example, 12 or
// 12.2.
/
/ ASMCMD ASM proxy related errors: 9470-9475
/
9470, 1, "ASM proxy instance unavailable"
// *Cause: An ASM proxy instance was detected but was not ONLINE.
// *Action: Start the 'ora.proxy_asm' resource.
/
9471, 1, "cannot enable or disable volumes"
// *Cause: Could not communicate with the ASM proxy.
// *Action: Start the 'ora.proxy_asm' resource.
/
9472, 1, "failed to connect to the ASM proxy"
// *Cause: An ONLINE ASM proxy was detected but the connection failed.
// *Action: Contact Oracle Support Services.
/
9473, 1, "volume STATE will show as REMOTE"
// *Cause: An ASM proxy instance was detected but was not ONLINE.
// An Oracle Flex ASM instance cannot display the volume state.
// *Action: This error is informational only.
/
9474, 1, "volume statistics cannot be queried"
// *Cause: An ASM proxy instance was detected but was not ONLINE.
// An Oracle Flex ASM instance cannot display the volume statistics.
// *Action: Start the 'ora.proxy_asm' resource.
/
9475, 1, "ASM proxy SID not found"
// *Cause: An ONLINE ASM proxy was found but the SID could not be determined.
// *Action: Contact Oracle Support Services.
/
/ ASMCMD Domain Services Cluster and member cluster related errors: 9476-9500
/
9476, 1, "failed to create the Cluster Manifest File for member cluster '%s'"
// *Cause: Creation of the Cluster Manifest File for the member cluster failed.
// *Action: Enable Oracle Flex ASM. Refer to Oracle Automatic Storage
// Management Administrator's Guide for configuring Oracle Flex ASM.
// Ensure that the user has write access permission on the Cluster
// Manifest File.
// Retry the command.
/
9477, 1, "delete member cluster '%s' failed"
// *Cause: Deletion of the member cluster failed.
// *Action: Deinstall the member cluster using the procedure documented in the
// Oracle Clusterware documentation and retry the command.
/
9478, 2, "Create or delete member cluster '%(1)s' failed because the Domain Services Cluster is in '%(2)s' state."
// *Cause: An attempt to configure or deconfigure the indicated member cluster
// was rejected because the Domain Services Cluster was in the middle
// of upgrading or patching.
// *Action: Retry the command when the Domain Services Cluster is in 'Normal'
// state.
/
9479, 1, "invalid GUID '%s' specified"
// *Cause: The operation was rejected because the supplied Globally Unique
// Identifier (GUID) was syntactically invalid.
// *Action: Retry the command specifying the Globally Unique Identifier (GUID)
// as a text string of 32 hexadecimal digits (0-f) without a hyphen
// (-) character or the hexadecimal literal prefix (0x). Refer to the
// command inline help or product documentation for more information.
/
9480, 1, "There are too many connection strings for Oracle Flex ASM."
// *Cause: While fetching connection strings for Oracle Flex ASM, there were
// too many connection strings.
// *Action: Run the 'lsnrctl' command to see all are valid ASM end points, or
// try again later.
9481, 1, "There are no connection strings available for Oracle Flex ASM."
// *Cause: While fetching connection strings for Oracle Flex ASM, there were
// no connection strings available.
// *Action: Make sure ASM is running and is registered.
9482, 1, "Unknown error happened while fetching connection strings for FlexASM"
// *Cause: While fetching connection string for FlexASM, unknown error reported.
// *Action: Check ASM is running and is registered and retry.
9485, 0, "Operations on the ASM SPFILE require the SYSASM privilege."
// *Cause: An attempt to modify the ASM SPFILE was made without the SYSASM privilege.
// *Action: Retry the operation as a SYSASM user.
9487, 2, "'%s' cannot be run with '%s' privilege"
// *Cause: Command was executed with lower privilege
// *Action: Retry with appropriate privilege.
9488, 1, "operations on member cluster require SYSASM privilege"
// *Cause: An attempt was made to create or delete a member cluster without the
// SYSASM privilege.
// *Action: Retry the operation as a SYSASM user.
9489, 0, "no member clusters configured"
9490, 1, "member cluster '%s' is not configured"
// *Cause: The specified member cluster was not configured.
// *Action: Execute the 'asmcmd lscc' command to list all of the configured
// member clusters. Reexecute the command with a member cluster name
// that is configured.
9491, 0, "failed to list the configured member clusters"
// *Cause: A failure occurred while attempting to display the member cluster
// configuration. The accompanying error message provides the details.
// *Action: Examine the accompanying error message, address the reported issue
// and retry the operation.
9492, 3, "The configuration for member cluster '%s' is inconsistent between components '%s' and '%s'."
// *Cause: There were multiple member clusters identified by the indicated name
// with mismatched versions or GUIDs.
// *Action: Deinstall one of the member clusters, and deconfigure using a
// component-specific method. Create the member cluster with a
// different name using the 'asmcmd mkcc' command with the required
// components. Install and configure the new member cluster.
9493, 1, "The '%s' feature is not supported on this operating system."
// *Cause: The command was rejected because the indicated feature is not
// supported on this operating system.
// *Action: Refer to the command inline help or product documentation for more
// information.
9494, 2, "failed to create component '%s' credentials for member cluster '%s'"
// *Cause: A failure occurred while attempting to create credentials for the
// member cluster.
// *Action: Examine the accompanying error message, address the reported issue,
// and retry the operation. If there are no accompanying error
// messages, contact Oracle Support Services.
9495, 1, "Directory '%s' does not exist."
// *Cause: An attempt was made to create a file in a nonexistent directory."
// *Action: Create the directory and retry the operation.
9496, 1, "The Cluster Manifest File '%s' does not contain any components."
// *Cause: A Cluster Manifest File that does not contain any components was
// provided.
// *Action: Provide a valid Cluster Manifest File and retry the operation.
9497, 1, "File '%s' is not a Cluster Manifest File."
// *Cause: The file provided was not a Cluster Manifest File.
// *Action: Provide a valid Cluster Manifest File and retry the operation.
9498, 0, "The command is only supported on the Domain Services Cluster."
// *Cause: An attempt was made to run a command that is only supported on the
// Domain Services Cluster.
// *Action: Rerun the command on the Domain Services Cluster.
9499, 1, "invalid member cluster version '%s'"
// *Cause: An attempt to create a configuration for a member cluster failed
// because an invalid cluster version was provided for the cluster.
// *Action: Retry the operation, providing a valid member cluster version in
// the required format (%u.%u.%u.%u.%u).
9500, 1, "member cluster version '%(1)s' is incompatible with Domain Services Cluster version '%(2)s'"
// *Cause: The specified member cluster version was not supported by the Domain
// Services Cluster.
// *Action: Upgrade or downgrade the Domain Services Cluster to a version that
// is compatible with the member cluster version and retry the
// operation. Install a member cluster using a supported version.
// Refer to product documentation for a complete list of supported
// releases.
/
/ ASMCMD Audit Life Cycle Management command related errors 9501-9550
/
9501, 1, "Clear timestamp for OS trail type requires RAC instance number"
// *Cause: There was no RAC instance number specified to clear timestamp
// for OS trailtype
// *Action: Specify the RAC Instance number for OS trail type.
9502, 1, "Set timestamp for OS trail type requires RAC instance number"
// *Cause: RAC instance number was not specified while OS trail type was
// specified.
// *Action: Provide a RAC instance number for OS trail type for set timestamp
// operation.
/
/ AFD discovery diskstring & label operation errors.
/
9511, 1, "failed to obtain required AFD disk string from Oracle Local Repository"
// *Cause: The AFD disk string required for this operation could not be
// retrieved from the Oracle Local Repository (OLR).
// *Action: Check that Oracle Clusterware is properly configured
// using 'ocrcheck -local'. Ensure that ASMCMD afd_dsset command
// is used to set AFD disk string before retrieving the value.
9512, 1, "failed to update AFD disk string in Oracle Local Repository."
// *Cause: An error occurred while setting AFD disk string.
// *Action: Check that Oracle Clusterware is properly configured
// using 'ocrcheck -local'.
9513, 1, "ASM disk label set operation failed.\n"
// *Cause: An error occurred while setting the ASM label.
// *Action: Examine the accompanying error messages and correct the problem
// indicated, then retry the afd_label operation.
9514, 1, "ASM disk label clear operation failed.\n"
// *Cause: An error occurred while clearing the ASM label.
// *Action: Examine the accompanying error messages and correct the problem
// indicated, then retry the afd_unlabel operation.
9515, 1, "KFOD executable not found at '%s'"
// *Cause: The KFOD executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
9516, 1, "AFDTOOL executable not found at '%s'"
// *Cause: The AFDTOOL executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
9517, 1, "AFDROOT executable not found at '%s'"
// *Cause: The AFDROOT executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
9518, 1, "AFDDRIVERSTATE executable not found at '%s'"
// *Cause: The AFDDRIVERSTATE executable was not found at the indicated location.
// *Action: Contact Oracle Support Services.
9519, 1, "ASMLib is present with ASM disk string '%s'; command requires default ASM disk string"
// *Cause: An attempt was made to configure AFD when ASMLib was present.
// To configure AFD when ASMLib is present, the ASM disk string needs
// to be a default string. Otherwise, when the Oracle Clusterware
// stack is restarted, the AFD devices cannot be discovered.
// *Action: Use a SQL command or ASMCMD command to set the ASM disk string
// to be default empty string. Refer to the product documentation and
// follow the procedure to configure AFD.
9520, 1, "AFD is not '%s'"
// *Cause: The Oracle ASM Filter Driver (AFD) was either not supported,
// not installed, or not loaded.
// *Action: If attempting to pre-label the devices, then use the --init option.
// Otherwise, contact Oracle Support Services.
9521, 0, "AFD is already configured"
// *Cause: AFD was already configured and loaded on the node.
// *Action: Run the command when AFD is not configured. Refer to the product
// documentation and follow the procedure to configure AFD.
9522, 0, "Insufficient permission to execute the command. Require privileged user"
// *Cause: A non-privileged user attempted to execute a command requiring
// privileges.
// *Action: Issue the command again as a privileged user.
9523, 0, "command cannot be used when Oracle Clusterware stack is up"
// *Cause: The command was executed when the Oracle Clusterware stack was up.
// *Action: Stop Oracle Clusterware using 'crsctl stop crs' command and retry.
/
9524, 0, "AFD configuration failed '%s'"
// *Cause: The afd_configure command was not successful.
// *Action: Examine the accompanying error messages, correct the problem
// indicated and then retry the command. Check ASMCMD alert log for
// more information.
/
9525, 0, "AFD deconfiguration failed '%s'"
// *Cause: The afd_deconfigure command was not successful.
// *Action: Examine the accompanying error messages, correct the problem
// indicated and then retry the command. Check ASMCMD alert log for
// more information.
/
9526, 0, "The AFD state is '%s' and filtering is '%s' on host '%s'"
// *Cause: User requested to retrieve the status of AFD on the node.
// *Action: Note the status of AFD and its filtering mode.
/
9527, 0, "AFD is loaded, but resource ora.driver.afd does not exist"
// *Cause: The command was executed with AFD loaded on the node but its
// OHASD resource ora.driver.afd did not exist.
// *Action: Forcibly configure AFD using the 'ASMCMD afd_configure -f' command.
/
9528, 1, "disk '%s' does not exist"
// *Cause: The disk specified did not exist.
// *Action: Specify a disk that exists.
/
9529, 1, "The executable '%s' is either not found or non-executable in the\nlocation(s) %s"
// *Cause: The executable file is either not found or non executable in the
// specified location(s). It must be available in any one of the
// specified location(s).
// *Action: Contact Oracle Support Services.
/
9530, 1, "The AFD state is '%s'"
// *Cause: User requested to retrieve the status of AFD.
// *Action: Note the status of AFD. AFD is functional if the state is LOADED.
/
9531, 0, "External redundancy disk groups cannot contain sites."
// *Cause: The tag <site> was not compatible with the external redundancy disk groups.
// *Action: Do not use <site> tags when the command is applied to an external
// disk group.
/
9532, 0, "command cannot be used when Oracle Clusterware stack is down"
// *Cause: The command was executed when the Oracle Clusterware stack was down.
// *Action: Start Oracle Clusterware using 'crsctl start crs' command and retry.
/
9533, 0, "resource ora.driver.afd does not exist"
// *Cause: The command was executed when OHASD resource ora.driver.afd
// did not exist.
// *Action: Verify the status of AFD using the 'ASMCMD afd_state' command.
/
9534, 0, "Discovery string is not provided."
// *Cause: The discovery string was not provided and the stamp operation was
// not permitted.
// *Action: Provide a discovery string adding the option '--dscstr' to the
// command 'asmcmd stamp'.
/
9535, 0, "Failure group label is not provided."
// *Cause: An attempt was made to stamp a site label without providing a
// failure group label.
// *Action: Provide a failure group label adding the option '--failgroup'
// to the command 'asmcmd stamp'.
/
9536, 1, "The site label '%s' is invalid."
// *Cause: An invalid site label was supplied.
// *Action: Specify a site name which is at least one character but no more
// than 15 characters in length. A site name consists of alphanumeric
// characters plus the hyphen character (a..z, A..Z, 0..9, -). It
// cannot begin with a numeric character. It cannot begin or end with
// the hyphen (-) character.
/
9537, 1, "The failure group label '%s' is invalid."
// *Cause: An invalid failure group label was supplied.
// *Action: Specify a failure group label that is a valid SQL identifier. It
// must be at least one character in length but no more than 30
// characters in length. It must begin with a letter and is composed of
// letters, digits, and the underscore (_) character.
/
9538, 1, "The disk label '%s' is invalid."
// *Cause: An invalid disk label was supplied.
// *Action: Specify a disk label that is a valid SQL identifier. It must be at
// least one character in length but no more than 23 characters in
// length. It must begin with a letter and is composed of letters,
// digits, and the underscore (_) character.
/
9539, 1, "No disks were discovered using the string '%s'."
// *Cause: The supplied discovery string did not match any disk.
// *Action: Provide a valid discovery string.
/
9540, 1, "Disks are managed by AFD or ASMLIB."
// *Cause: An attempt was made to stamp the disk label on disks that are
// managed by Oracle ASM Filter Driver (AFD) or ASMLIB."
// *Action: Provide a discovery string for disks that are not managed by AFD or
// ASMLIB, or do not provide the disk label, and retry the command.
/
9541, 2, "Disk %s belongs to mounted disk group %s."
// *Cause: An attempt was made to stamp a disk that belongs to a mounted
// disk group.
// *Action: Dismount the disk group and retry the command.
/
9542, 2, "Disk %s is member of disk group %s and ASMCMD is not connected to an instance."
// *Cause: An attempt was made to stamp a disk that is a member of an ASM disk
// group, and ASMCMD was not connected to an ASM instance to verify
// if that disk group was mounted.
// *Action: Connect ASMCMD to an ASM instance and retry the command.
/
9543, 0, "cannot rename the site and the failgroup for a disk"
// *Cause: An attempt was made to rename the site and the failgroup for a disk.
// The operation was not permitted because these options are mutually
// exclusive, since the failgroup can be renamed only if the disk group
// redundancy is external and the site cannot be renamed if the disk
// group redundancy is external.
// *Action: Provide only one of the two options: 'site' or 'failgroup'.
/
9544, 0, "The command is not supported on a member cluster."
// *Cause: An attempt was made to run a command that was not supported on
// a member cluster.
// *Action: Rerun the command on the storage server.
/
9545, 0, "The installed AFD drivers are not correct for this operating system."
// *Cause: A request to retrieve the status of Oracle ASM Filter Driver (AFD)
// was made. The installed AFD drivers and the current running
// operating system were not compatible.
// *Action: Contact Oracle Support Services.
/
9546, 0, "Insufficient permission to execute the command. The command requires an Oracle Grid Infrastructure user."
// *Cause: An attempt was made to execute a command by a user who was not an
// Oracle Grid Infrastructure user.
// *Action: Rerun the command as an Oracle Grid Infrastructure user.
/
OHA YOOOO