MINI MINI MANI MO
/
/ $Header: lfius.msg 11-jan-2008.03:14:17 madhanap Exp $
/
/ Copyright (c) 1993, 2003, Oracle. All rights reserved.
/ NAME
/ lfius.msg - LFI US language error message file
/ DESCRIPTION
/ Error message file for LFI package
/ RETURNS
/
/ NOTES
/ <other useful comments, qualifications, etc.>
/
/ LFI Error Messages
/
/
// 00000, 00000, "Normal, successful completion."
// *Cause: Normal exit
//
// *Action: None
//
// 00001, 00000, "File IO Internal Error #%ld"
// *Cause: An internal error occurred.
//
// *Action: Contact the development organization.
//
/
/
/ Generic errors
/
/
00002, 00000, "Out of memory. %s"
// *Cause: The File IO package failed in trying to dynamically allocate
// memory. function name is used for additional comments to
// indicate where, when and why the error occured.
//
// *Action: Perform whatever actions necessary to make more memory available
// to the executing program.
//
00003, 00000, "Internal exception code. icode = [%s], [%s]."
// *Cause: Unknown - indicated by parameters. The first '%s' gives
// the internal exception code; the second is for any other
// additional comments.
//
// *Action: Report to the appropriate development group
//
00004, 00000, "Call to %s failed."
// *Cause: A function call has failed. This error is a generic
// message to show that the exception has occurred in a
// particular function function name. This allows the client to
// know the trace runtime calling sequence by examining the
// exception stack.
//
// *Action: See the accompanying error messages for more information.
//
00005, 00000, "Free some memory failed in %s."
// *Cause: A call to free some memory in function function name has failed.
//
// *Action: See the accompanying error messages for more information and
// contact Oracle Worldwide Support immediately.
//
00006, 00000, "Invalid parameter to function %s."
// *Cause: The function was called with an invalid parameter.
//
// *Action: Check the function call to make sure that the correct
// parameters are being passed.
//
00007, 00000, "NLSRTL's call failed. %s."
// *Cause: LX calls return failure
//
// *Action: Check if our parameters are correct. Contact the
// appropriate group immediately if we parameters are valid.
//
00008, 00000, "SLTS's initializing/terminating mutex failed for %s."
// *Cause: SLTS's call return failure in function '%s'.
//
// *Action: Contact the appropriate development group.
//
//
/
/ 100-999 Reserved for LFI Public interface errors
/
/
00100, 00000, "Unable to perform operation, file not opened in %s."
// *Cause: The file has not been successfully opened at the time the
// operation is attempted.
//
// *Action: Check to make sure that the file exists (for read) or that
// the program has access to the write a file (for write).
// It is also possible that the file was just never opened
//
00101, 00000, "Write failed, file cannot be written to."
// *Cause: The buffer write operation failed. Possibly due to incorrect
// parameters being passed in.
//
// *Action: Check the underlying error for more information.
//
00102, 00000, "Unable to seek in sequentially accessed file."
// *Cause: The file was opened with the flag LFILFA_SEQ for sequential
// file operations. Use seek only on files that are
// opened with the LFILFA_RANDOM flag for random access.
//
// *Action: Check to see how the file is being opened and accessed and
// make the two operations consistent (that is, make them both
// operations either sequential or random).
//
00103, 00000, "Seek operation failed."
// *Cause: The buffer seek operation failed. Probably due to incorrect
// parameters or flags.
//
// *Action: Check syntax of the seek command and retry the operation.
//
00104, 00000, "Read operation failed."
// *Cause: The buffer read operation failed. Probably due to incorrect
// parameters or flags.
//
// *Action: Check syntax of the read command and retry the operation.
//
00105, 00000, "Unable to add path."
// *Cause: One of the following might have caused the error:
// the current path might not be in the proper format
// the directory might not be in the proper format
// the name object might not have been initialized properly
//
// *Action: Check the format of the current path and the new directory;
// check that the name object was initialized properly.
//
00106, 00000, "Path object holds more than one path."
// *Cause: The path object passed to lfippth() holds more than
// one path.
//
// *Action: Make sure that the path object used in lfippth() holds
// only one path.
//
00107, 00000, "Open does not expect the file [%s][%s] to exist."
// *Cause: The flags specified for the open indicate that the file does
// not exist. However, the file does exist.
//
// *Action: Check to make sure that the options that were specified for
// the file are correct and that you do not expect that the file
// should exist. If so then find out why the file does exist.
//
00108, 00000, "Open expect the file [%s][%s] to exist."
// *Cause: The flags specified for the open indicate that the file
// the file to exist and it does not.
//
// *Action: Check to make sure that the options that were specified for
// the file are correct and that you expect that the file
// should exist. If so then find out why the file doesn't.
//
00109, 00000, "Unable to open file [%s][%s]. %s."
// *Cause: Either:
// the process does not have the proper access rights to open
// the file
// the file is already open
//
// *Action: Check to make sure the proper access permissions are assigned.
// If they are and the file still cannot be opened, then
// contact Oracle Worldwide Support.
//
00110, 00000, "Unable to initialize the Buffer Manager."
// *Cause: The Buffer Manager initialization routine failed; probably
// because memory was exhausted.
//
// *Action: See the accompanying error messages for more information.
//
00111, 00000, "No other flags allowed in fixed length format."
// *Cause: Other options are specified with the fixed length format.
//
// *Action: Clear other options from flag.
//
//
// 00112, 00000, "Invalid Standard File ID Descriptor."
// *Cause: The function lfigfo() was called with an invalid File ID
// Descriptor. The valid File ID Descriptors are LFISTDIN,
// LFISTDOUT, and LFISTDERR.
//
// *Action: Check the call to lfigfo() to make sure it is correct.
//
00113, 00000, "Unable to initialize the Standard File object %s."
// *Cause: The call to open the standard file object failed.
//
// *Action: Check the underlying errors for more information.
//
00114, 00000, "Append is not allowed with %s."
// *Cause: Attempting to append using certain options.
//
// *Action: Check the flag options to verify its usage.
//
//
00115, 00000, "Buffer free failed."
// *Cause: Probably do to the buffer flush failing.
//
// *Action: See the accompanying error messages for more information.
//
00116, 00000, "Unable to close file in operation %s."
// *Cause: The file close operation failed.
//
// *Action: See the accompanying error messages for more information.
//
00117, 00000, "Unable to rename file."
// *Cause: The rename operation failed. Rename is called when we are
// protecting a file by operating on a temp file.
//
// *Action: Check to make sure that the process has the correct
// access rights to perform a rename.
//
00118, 00000, "Unable to change type to Unknown."
// *Cause: The function lfichty() was called to change the file
// extension to LFIEXUNK (Unknown). This is not a valid
// operation.
//
// *Action: Check why you are doing this. If the extension is already
// unknown then you do not need to do this. If you just want
// no extension then use the extension type LFIEXNONE.
//
00119, 00000, "Unable to Abort an Unprotected file."
// *Cause: The Abort function lfiabt() was called on a file that
// was not opened as a protected file. As such the abort
// operation is not valid.
//
// *Action: Check to see if you intended to open the file as a protected
// file.
//
00120, 00000, "Unable to parse root filename %s."
// *Cause: The root filename that was given to lfimknam() is not in a
// format that this platform understands.
//
// *Action: Check the format of the filename and retry the operation.
//
00121, 00000, "Only one of REPLACE, or PROT allowed for opty."
// *Cause: Two or more of the following open type options were
// specified for the lfilini() function: LFILOPTY_REPLACE,
// or LFILOPTY_PROT.
//
// *Action: Remove one or more the of options such that you are only
// passing in one of the three.
//
00122, 00000, "Can only delete a file if we create it."
// *Cause: The delete file flag was specified for a file that was not
// created by this file operation. The ability to delete a
// file is not portable. As such the only deletion that
// is allowed by this package is if we know we want to delete
// the file when we create it.
//
// *Action: You can only delete a file that you create. If you need
// to delete a file that you do not create then you will have
// to find another means of doing so.
//
00123, 00000, "Cannot access file Sequentially and Randomly."
// *Cause: Both the LFILFA_SEQ (sequential) and LFILFA_RANDOM (random)
// flags were specified during the file object creation. This
// is not allowed. Only one of the two may be specified.
//
// *Action: Choose how you wish to access the file. If you choose
// random you can still access sequentially by just not using
// the repositioning functions.
//
00124, 00000, "No access mode was specified, default is sequential."
// *Cause: Neither LFILFA_SEQ (sequential) or LFILFA_RANDOM (random) were
// specified during file object creation.
//
// *Action: The default is sequential but this should be explicitly set.
//
00125, 00000, "Random access only allowed on fixed length record files."
// *Cause: The LFILFA_RANDOM flag was specified on a file that was
// not organized into fixed-length records. Random access
// is only allowed on fixed-length record files.
//
// *Action: Determine if the organization of your data needs to be in
// variable-length records and if you need to have random
// access to the file. If both conditions are true then
// you might need to buffer the entire file or enough of it
// to remove your need for random access. Another option is
// to close and rescan the file although this is not the
// optimal solution.
//
00126, 00000, "Record format can only be one of Fixed or Variable."
// *Cause: Both LFILRF_FIXED (fixed) and LFILRF_VAR (variable) were
// specified during file object creation. Only one of the two is
// allowed for a given file.
//
// *Action: Determine how the file is organized and choose the option
// that matches.
//
00127, 00000, "No Record Format was specified, default is variable."
// *Cause: Neither LFILRF_FIXED (fixed) or LFILRF_VAR (variable) were
// specified for record format. One of the two must be specified
// for each file.
//
// *Action: The default is LFILRF_VAR, but this should be explicitly set
// during file object creation.
//
00128, 00000, "Carriage Control is only valid for Standard file objects."
// *Cause: The Carriage Control option is only valid for the
// standard file objects (LFISTDIN, LFISTDOUT, LFISTDERR).
// You may not specify this option for any other type of file.
//
// *Action: Choose between LFILRF_FIXED and LFILRF_VAR for the record
// format.
//
00129, 00000, "Invalid option %s were specified on an input only file."
// *Cause: The file was opened as input only but the output mode
// option LFILRF_WR_ASIS or delete option LFLOPTY_DELETE
// was specified.
//
// *Action: Check to see how you intend to open this file and make the
// necessary changes.
//
00130, 00000, "Input option specified on output only file."
// *Cause: The file was opened as output only but one of the input
// mode options (LFILRF_READ_NL or LFILRF_FORCE_NL) or was
// specified.
//
// *Action: Check to see how you intend to open this file and make the
// necessary changes.
//
00131, 00000, "No open type specified."
// *Cause: The file object was created without an open type (that is,
// LFILOPTY_INPUT, LFILOPTY_OUTPUT, etc.).
//
// *Action: Decide how the file should be accessed and specify one of
// the open types.
//
00132, 00000, "Record length %s is greater than max length of %s."
// *Cause: The record length specified for the file is greater than
// the max supported by this platform.
//
// *Action: Decrease the record length.
//
00133, 00000, "Trying to create file %s that already exists."
// *Cause: The file object was initialized with LFILOPTY_OUTPUT and
// without LFILOPTY_REPLACE and yet a file by this name already
// exists.
//
// *Action: Check to make sure that you are creating the right file. If
// you intend to overwrite the file if it exists that specify the
// replace option LFILOPTY_REPLACE when initializing the file
// object.
//
00134, 00000, "Unable to protect a file for an append operation."
// *Cause: The LFILOPTY_APPEND and LFILOPTY_PROT options were both
// specified for the file. This is currently not allowed because
// it would require copying the entire file at open time.
//
// *Action: Decide if you really need to protect the file for append. If
// so then think about making a copy of it before appending.
//
00135, 00000, "Unable to remove temporary file."
// *Cause: A temporary file was created to protect a file and when the
// the tempfile was nolonger needed it LFI attempted to remove
// it and was unable to do so.
//
// *Action: Check the permissions and where the temp files are being
// created.
//
00136, 00000, "Unable to change type of open file."
// *Cause: The function lfichty() was called on an opened file.
//
// *Action: This is a bug in the client code. lfichty() cannot be
// used in this case.
//
00137, 00000, "Unable to perform %s on a file object that is %s."
// *Cause: Unable to perform an LFI operation on a file object for
// the given reason.
//
// *Action: Take the appropriate corrective measure. For example
// if a file is supposed to be opened before the
// operation can be performed, client code will need to
// open the file first.
//
00138, 00000, "Unable to perform %s on a name object that is %s."
// *Cause: Unable to perform an LFI operation on a name object for
// the given reason.
//
// *Action: Take the appropriate corrective measure.
//
00139, 00000, "Option %s cannot be used with option %s in calling %s."
// *Cause: First option cannot be used with second option in such
// a function call.
//
// *Action: Re-examine code to determine which option is needed.
//
00140, 00000, "Invalid option %s were specified on input-output file."
// *Cause: The file was opened as input-output and one of the
// mode options (LFIOPTY_DELETE or non-LFIOPTY_RANDOM)
// was specified.
//
// *Action: Check to see how you intend to open this file and make the
// necessary changes.
//
00141, 00000, "Unable to abort file in operation %s."
//
// *Cause: The abort operation failed.
//
// *Action: Check the underlying errors for more information.
//
00142, 00000, "Unable to delete an existing file [%s][%s] not owned by Oracle."
//
// *Cause: The file was not created by Oracle.
//
// *Action: Change owner of file to Oracle or give Oracle access
// privileges to delete it.
//
00143, 0000, "Unable to delete non-existent file %s."
//
// *Cause: The file to be deleted does not exist.
//
// *Action: Check the underlying errors for more information.
//
00144, 00000, "File [%s][%s] does not exist"
// *Cause: The file does not exist.
//
// *Action: Check to make sure the file exists and retry the operation.
//
00145, 00000, "User buffer too short."
//
// *Cause: The buffer that was passed is not large enough.
//
// *Action: Allocate a larger buffer and retry the operation.
//
00146, 00000, "copy does not expect the file %s.%s to exist"
// *Cause: We are expecting the destination file not to exist and it does.
//
// *Action: Find out why the file does exist.
//
00147, 00000, "File %s.%s does not exist"
// *Cause: The file does not exist.
//
// *Action: Check to make sure the file exists and retry the operation.
//
00148, 00000, "%s can be called only on files opened in byte mode"
// *Cause: A routine that should be used only for files in byte
// mode was called for a file that was opened in record
// mode
//
// *Action: In order to use this function, the file should be opened in
// byte mode.
//
00149, 00000, "Error on destroying hash table in function %s"
// *Cause: We were expecting the cache path object and it does not.
//
// *Action: In order to use this function, the path object should be
// cache path object.
//
00150, 00000, "Error on creating hash table in function %s"
// *Cause: routine failed to create path object hash table
//
// *Action: make sure that startsize <= LHTQMAXSLOTS
//
00151, 00000, "Error on inserting into hash table in function %s"
// *Cause: routine failed to insert into hash table
//
// *Action: make sure there is enough memory for allocation and
// that the hash table exists.
//
00152, 00000, "Read operation (byte mode) failed."
// *Cause: Byte mode read operation failed. Probably due to incorrect
// parameters or flags, or trying to read beyond end of file.
//
// *Action: Check syntax of the read command and size of file.
//
/
/
/ 1000-1499 Reserved for LFI Buffer Manager errors
/
/
01000, 00000, "Unable to write line to file."
// *Cause: The file being written to may no longer be open or we may have
// reached the end of the file.
//
// *Action: Examine underlying errors for more information.
//
01001, 00000, "Unable to write %s bytes to file."
// *Cause: The file being written to may no longer be open or we may have
// reached the end of the file.
//
// *Action: Examine underlying errors for more information.
//
01002, 00000, "Unable to read line from file."
// *Cause: The file being read from may no longer be open.
//
// *Action: Examine underlying errors for more information.
//
01003, 00000, "Unable to read %s bytes from file."
// *Cause: The file being read from may no longer be open.
//
// *Action: See the accompanying error messages for more information.
//
01004, 00000, "Unable to empty buffer."
// *Cause: The buffer manager is probably unable to write to the
// underlying file.
//
// *Action: Examine underlying errors for more information.
//
01005, 00000, "Unable to fill buffer."
// *Cause: The buffer manager is probably unable to read from the
// underlying file.
//
// *Action: See the accompanying error messages for more information.
//
01006, 00000, "File ends in partial character in %s."
// *Cause: A line ends in a partial character.
//
// *Action: Examine underlying errors for more information.
//
01007, 00000, "Line is too long; encountered in function %s."
// *Cause: The length of the line exceeds the maximum length.
//
// *Action: Examine underlying errors for more information.
//
/
/ 1500-1599 Reserved for LFI OSD errors
/
/
01500, 00000, "Error condition on call to OSD function %s."
// *Cause: An error condition arises in calling an OSD function.
// This message occurs if calls to malloc or free
// functions failed.
//
// *Action: Contact Oracle Worldwide Support.
//
01501, 00000, "tmpnam() fails to generate temporary file name."
// *Cause: Operating system was unable to create temporary file name.
//
// *Action: Contact the development organization.
//
01502, 00000, "Base filename does not exist."
// *Cause: The filename that was parsed had no base file. It was either
// all path or extension.
//
// *Action: Check the filename being passed in to make sure it is correct.
//
01503, 00000, "Max filename size exceeded generating filename."
// *Cause: While building a filename we exceeded the buffer allocated
// to hold the new filename.
//
// *Action: Contact the development organization.
//
01504, 00000, "fseek() failed(OSD return value = %s) in %s."
// *Cause: The function fseek() returned an error condition.
//
// *Action: Contact Oracle Worldwide Support.
//
01505, 00000, "fclose() failed(OSD return value = %s) in %s."
// *Cause: The function fclose() returned an error condition.
//
// *Action: Contact Oracle Worldwide Support.
//
01506, 00000, "fflush() failed(OSD return value = %s)."
// *Cause: The function fflush() returned an error condition.
//
// *Action: Contact the development organization.
//
01507, 00000, "fwrite() failed(OSD return value = %s) in %s."
// *Cause: File pointer may be null or may not be opened for write.
//
// *Action: Contact the development organization.
//
01508, 00000, "access() failed."
// *Cause: Call to access() failed.
//
// *Action: Contact the development organization.
//
01509, 00000, "fopen() failed(OSD return value = %s)."
// *Cause: Call to fopen() failed.
//
// *Action: Contact Oracle Worldwide Support.
//
01510, 00000, "fread() failed(OSD return value = %s) in %s."
// *Cause: Call to fread() failed.
//
// *Action: Contact Oracle Worldwide Support.
//
01511, 00000, "unlink() failed(OSD errno = %s) in %s."
// *Cause: Call to unlink() failed.
//
// *Action: Contact the development organization.
//
01512, 00000, "stat() failed"
// *Cause: Call to stat() failed.
//
// *Action: Contact Oracle Worldwide Support.
//
01514, 00000, "ftell() failed in %s"
// *Cause: The ftell() function returned an error.
//
// *Action: Contact Oracle Worldwide Support.
//
01515, 00000, "truncate() failed."
// *Cause: The function truncate() returned an error condition.
//
// *Action: Contact the development organization.
//
01516, 00000, "read() failed (OSD return value = %s) in %s."
// *Cause: Call to read() failed.
//
// *Action: Contact the development organization.
//
01517, 00000, "open() failed(OSD return value = %s)."
// *Cause: Call to open() failed.
//
// *Action: Contact the development organization.
//
01518, 00000, "write() failed(OSD return value = %s) in %s."
// *Cause: Call to write() failed.
//
// *Action: Contact the development organization.
//
01519, 00000, "llseek() failed(OSD return value = %s) in %s."
// *Cause: The llseek() function returned an error.
//
// *Action: Contact Oracle Worldwide Support.
//
01520, 00000, "close() failed(OSD return value = %s) in %s."
// *Cause: The function close() returned an error condition.
//
// *Action: Contact the development organization.
//
01521, 00000, "fsync() failed(OSD return value = %s) in %s."
// *Cause: The function fsync() returned an error condition.
//
// *Action: Contact the development organization.
//
01522, 00000, "opendir() failed."
// *Cause: The function opendir() returned an error condition.
//
// *Action: Contact the development organization.
//
01523, 00000, "rename() failed."
// *Cause: The function rename() returned an error condition.
//
// *Action: Contact the development organization.
//
01524, 00000, "fdopen() failed(OSD return value = %s)."
// *Cause: Call to fdopen() failed.
//
// *Action: Contact the development organization.
//
01525, 00000, "setvbuf() failed."
// *Cause: The function setvbuf() returned an error condition.
//
// *Action: Contact the development organization.
//
/
/
/ LFI Internal errors
/
/
// 000001, "Extension not in list"
// *Cause: When calling lfiext, an extension is not found in list
//
// *Action: Contact the development organization.
//
// 000002, "lfipmkp's pop's tail is NULL"
// *Cause: An internal error has occurred that cause pop's tail
// to be NULL.
//
// *Action: Contact the development organization.
//
// 000003, "Unexpected switch case in %s"
// *Cause: An unexpected switch to default has occurred.
//
// *Action: Contact the development organization.
//
// 000004, "sltbev() call failed"
// *Cause: A call to sltbev() had failed.
//
// *Action: Contact the development organization.
//
// 000005, "Invalid parameter in internal function %s"
// *Cause: Invalid parameter has been passed into an internal
// function.
//
// *Action: Contact the development organization.
// 00006, "Invalid Standard File ID Descriptor"
// *Cause: The function lfiostd() was called with an invalid File ID
// Descriptor. The valid File ID Descriptors are LFISTDIN_INDEX,
// LFISTDOUT_INDEX, and LFISTDERR_INDEX.
//
// *Action: Check the call to lfiostd() to make sure it is
// correct.
//
//
// 00007, "List element not found"
// *Cause: A call to lfillmem() had failed.
//
// *Action: Contact development service
//
// 00008, "lficstd failed when calling lfibfr()"
// *Cause: A call to lficstd() had failed.
//
// *Action: Contact development service
//
OHA YOOOO