MINI MINI MANI MO

Path : /usr/share/doc/python2-certbot-1.11.0/

Current File : //usr/share/doc/python2-certbot-1.11.0/CHANGELOG.md

# Certbot change log

Certbot adheres to [Semantic Versioning](https://semver.org/).

## 1.11.0 - 2021-01-05

### Added

### Changed

* We deprecated support for Python 2 in Certbot and its ACME library.
Support for Python 2 will be removed in the next planned release of Certbot.
* certbot-auto was deprecated on all systems. For more information about this
change, see
https://community.letsencrypt.org/t/certbot-auto-no-longer-works-on-debian-based-systems/139702/7.
* We deprecated support for Apache 2.2 in the certbot-apache plugin and it will
be removed in a future release of Certbot.

### Fixed

* The Certbot snap no longer loads packages installed via `pip install --user`. This
was unintended and DNS plugins should be installed via `snap` instead.
* `certbot-dns-google` would sometimes crash with HTTP 409/412 errors when used with very large zones. See [#6036](https://github.com/certbot/certbot/issues/6036).
* `certbot-dns-google` would sometimes crash with an HTTP 412 error if preexisting records had an unexpected TTL, i.e.: different than Certbot's default TTL for this plugin. See [#8551](https://github.com/certbot/certbot/issues/8551).

More details about these changes can be found on our GitHub repo.

## 1.10.1 - 2020-12-03

### Fixed

* Fixed a bug in `certbot.util.add_deprecated_argument` that caused the
deprecated `--manual-public-ip-logging-ok` flag to crash Certbot in some
scenarios.

More details about these changes can be found on our GitHub repo.

## 1.10.0 - 2020-12-01

### Added

* Added timeout to DNS query function calls for dns-rfc2136 plugin.
* Confirmation when deleting certificates
* CLI flag `--key-type` has been added to specify 'rsa' or 'ecdsa' (default 'rsa').
* CLI flag `--elliptic-curve` has been added which takes an NIST/SECG elliptic curve. Any of
`secp256r1`, `secp384r1` and `secp521r1` are accepted values.
* The command `certbot certficates` lists the which type of the private key that was used
for the private key.
* Support for Python 3.9 was added to Certbot and all of its components.

### Changed

* certbot-auto was deprecated on Debian based systems.
* CLI flag `--manual-public-ip-logging-ok` is now a no-op, generates a
deprecation warning, and will be removed in a future release.

### Fixed

* Fixed a Unicode-related crash in the nginx plugin when running under Python 2.

More details about these changes can be found on our GitHub repo.

## 1.9.0 - 2020-10-06

### Added

* `--preconfigured-renewal` flag, for packager use only.
See the [packaging guide](https://certbot.eff.org/docs/packaging.html).

### Changed

* certbot-auto was deprecated on all systems except for those based on Debian or RHEL.
* Update the packaging instructions to promote usage of `python -m pytest` to test Certbot
instead of the deprecated `python setup.py test` setuptools approach.
* Reduced CLI logging when reloading nginx, if it is not running.
* Reduced CLI logging when handling some kinds of errors.

### Fixed

* Fixed `server_name` case-sensitivity in the nginx plugin.
* The minimum version of the `acme` library required by Certbot was corrected.
In the previous release, Certbot said it required `acme>=1.6.0` when it
actually required `acme>=1.8.0` to properly support removing contact
information from an ACME account.
* Upgraded the version of httplib2 used in our snaps and Docker images to add
support for proxy environment variables and fix the plugin for Google Cloud
DNS.

More details about these changes can be found on our GitHub repo.

## 1.8.0 - 2020-09-08

### Added

* Added the ability to remove email and phone contact information from an account
using `update_account --register-unsafely-without-email`

### Changed

* Support for Python 3.5 has been removed.

### Fixed

* The problem causing the Apache plugin in the Certbot snap on ARM systems to
fail to load the Augeas library it depends on has been fixed.
* The `acme` library can now tell the ACME server to clear contact information by passing an empty
`tuple` to the `contact` field of a `Registration` message.
* Fixed the `*** stack smashing detected ***` error in the Certbot snap on some systems.

More details about these changes can be found on our GitHub repo.

## 1.7.0 - 2020-08-04

### Added

* Third-party plugins can be used without prefix (`plugin_name` instead of `dist_name:plugin_name`):
this concerns the plugin name, CLI flags, and keys in credential files.
The prefixed form is still supported but is deprecated, and will be removed in a future release.
* Added `--nginx-sleep-seconds` (default `1`) for environments where nginx takes a long time to reload.

### Changed

* The Linode DNS plugin now waits 120 seconds for DNS propagation, instead of 1200,
due to https://www.linode.com/blog/linode/linode-turns-17/
* We deprecated support for Python 3.5 in Certbot and its ACME library.
Support for Python 3.5 will be removed in the next major release of Certbot.

### Fixed

More details about these changes can be found on our GitHub repo.

## 1.6.0 - 2020-07-07

### Added

* Certbot snaps are now available for the arm64 and armhf architectures.
* Add minimal code to run Nginx plugin on NetBSD.
* Make Certbot snap find externally snapped plugins
* Function `certbot.compat.filesystem.umask` is a drop-in replacement for `os.umask`
implementing umask for both UNIX and Windows systems.
* Support for alternative certificate chains in the `acme` module.
* Added `--preferred-chain <issuer CN>`. If a CA offers multiple certificate chains,
it may be used to indicate to Certbot which chain should be preferred.
* e.g. `--preferred-chain "DST Root CA X3"`

### Changed

* Allow session tickets to be disabled in Apache when mod_ssl is statically linked.
* Generalize UI warning message on renewal rate limits
* Certbot behaves similarly on Windows to on UNIX systems regarding umask, and
the umask `022` is applied by default: all files/directories are not writable by anyone
other than the user running Certbot and the system/admin users.
* Read acmev1 Let's Encrypt server URL from renewal config as acmev2 URL to prepare
for impending acmev1 deprecation.

### Fixed

* Cloudflare API Tokens may now be restricted to individual zones.
* Don't use `StrictVersion`, but `LooseVersion` to check version requirements with setuptools,
to fix some packaging issues with libraries respecting PEP404 for version string,
with doesn't match `StrictVersion` requirements.
* Certbot output doesn't refer to SSL Labs due to confusing scoring behavior.
* Fix paths when calling to programs outside of the Certbot Snap, fixing the apache and nginx
plugins on, e.g., CentOS 7.

More details about these changes can be found on our GitHub repo.

## 1.5.0 - 2020-06-02

### Added

* Require explicit confirmation of snap plugin permissions before connecting.

### Changed

* Improved error message in apache installer when mod_ssl is not available.

### Fixed

* Add support for OCSP responses which use a public key hash ResponderID, fixing
interoperability with Sectigo CAs.
* Fix TLS-ALPN test that fails when run with newer versions of OpenSSL.

More details about these changes can be found on our GitHub repo.

## 1.4.0 - 2020-05-05

### Added

* Turn off session tickets for apache plugin by default when appropriate.
* Added serial number of certificate to the output of `certbot certificates`
* Expose two new environment variables in the authenticator and cleanup scripts used by
the `manual` plugin: `CERTBOT_REMAINING_CHALLENGES` is equal to the number of challenges
remaining after the current challenge, `CERTBOT_ALL_DOMAINS` is a comma-separated list
of all domains challenged for the current certificate.
* Added TLS-ALPN-01 challenge support in the `acme` library. Support of this
challenge in the Certbot client is planned to be added in a future release.
* Added minimal proxy support for OCSP verification.
* On Windows, hooks are now executed in a Powershell shell instead of a CMD shell,
allowing both `*.ps1` and `*.bat` as valid scripts for Certbot.

### Changed

* Reorganized error message when a user entered an invalid email address.
* Stop asking interactively if the user would like to add a redirect.
* `mock` dependency is now conditional on Python 2 in all of our packages.
* Deprecate certbot-auto on Gentoo, macOS, and FreeBSD.
* Allow existing but empty archive and live dir to be used when creating new lineage.

### Fixed

* When using an RFC 8555 compliant endpoint, the `acme` library no longer sends the
`resource` field in any requests or the `type` field when responding to challenges.
* Fix nginx plugin crash when non-ASCII configuration file is being read (instead,
the user will be warned that UTF-8 must be used).
* Fix hanging OCSP queries during revocation checking - added a 10 second timeout.
* Standalone servers now have a default socket timeout of 30 seconds, fixing
cases where an idle connection can cause the standalone plugin to hang.
* Parsing of the RFC 8555 application/pem-certificate-chain now tolerates CRLF line
endings. This should fix interoperability with Buypass' services.

More details about these changes can be found on our GitHub repo.

## 1.3.0 - 2020-03-03

### Added

* Added certbot.ocsp Certbot's API. The certbot.ocsp module can be used to
determine the OCSP status of certificates.
* Don't verify the existing certificate in HTTP01Response.simple_verify, for
compatibility with the real-world ACME challenge checks.
* Added support for `$hostname` in nginx `server_name` directive

### Changed

* Certbot will now renew certificates early if they have been revoked according
to OCSP.
* Fix acme module warnings when response Content-Type includes params (e.g. charset).
* Fixed issue where webroot plugin would incorrectly raise `Read-only file system`
error when creating challenge directories (issue #7165).

### Fixed

* Fix Apache plugin to use less restrictive umask for making the challenge directory when a restrictive umask was set when certbot was started.

More details about these changes can be found on our GitHub repo.

## 1.2.0 - 2020-02-04

### Added

* Added support for Cloudflare's limited-scope API Tokens

### Changed

* Add directory field to error message when field is missing.
* If MD5 hasher is not available, try it in non-security mode (fix for FIPS systems) -- [#1948](https://github.com/certbot/certbot/issues/1948)
* Disable old SSL versions and ciphersuites and remove `SSLCompression off` setting to follow Mozilla recommendations in Apache.
* Remove ECDHE-RSA-AES128-SHA from NGINX ciphers list now that Windows 2008 R2 and Windows 7 are EOLed
* Support for Python 3.4 has been removed.

### Fixed

* Fix collections.abc imports for Python 3.9.

More details about these changes can be found on our GitHub repo.

## 1.1.0 - 2020-01-14

### Added

### Changed

* Removed the fallback introduced with 0.34.0 in `acme` to retry a POST-as-GET
request as a GET request when the targeted ACME CA server seems to not support
POST-as-GET requests.
* certbot-auto no longer supports architectures other than x86_64 on RHEL 6
based systems. Existing certbot-auto installations affected by this will
continue to work, but they will no longer receive updates. To install a
newer version of Certbot on these systems, you should update your OS.
* Support for Python 3.4 in Certbot and its ACME library is deprecated and will be
removed in the next release of Certbot. certbot-auto users on x86_64 systems running
RHEL 6 or derivatives will be asked to enable Software Collections (SCL) repository
so Python 3.6 can be installed. certbot-auto can enable the SCL repo for you on CentOS 6
while users on other RHEL 6 based systems will be asked to do this manually.

### Fixed

More details about these changes can be found on our GitHub repo.

## 1.0.0 - 2019-12-03

### Added

### Removed

* The `docs` extras for the `certbot-apache` and `certbot-nginx` packages
have been removed.

### Changed

* certbot-auto has deprecated support for systems using OpenSSL 1.0.1 that are
not running on x86-64. This primarily affects RHEL 6 based systems.
* Certbot's `config_changes` subcommand has been removed
* `certbot.plugins.common.TLSSNI01` has been removed.
* Deprecated attributes related to the TLS-SNI-01 challenge in
`acme.challenges` and `acme.standalone`
have been removed.
* The functions `certbot.client.view_config_changes`,
`certbot.main.config_changes`,
`certbot.plugins.common.Installer.view_config_changes`,
`certbot.reverter.Reverter.view_config_changes`, and
`certbot.util.get_systemd_os_info` have been removed
* Certbot's `register --update-registration` subcommand has been removed
* When possible, default to automatically configuring the webserver so all requests
redirect to secure HTTPS access. This is mostly relevant when running Certbot
in non-interactive mode. Previously, the default was to not redirect all requests.

### Fixed

More details about these changes can be found on our GitHub repo.

## 0.40.1 - 2019-11-05

### Changed

* Added back support for Python 3.4 to Certbot components and certbot-auto due
to a bug when requiring Python 2.7 or 3.5+ on RHEL 6 based systems.

More details about these changes can be found on our GitHub repo.

## 0.40.0 - 2019-11-05

### Added

### Changed

* We deprecated support for Python 3.4 in Certbot and its ACME library. Support
for Python 3.4 will be removed in the next major release of Certbot.
certbot-auto users on RHEL 6 based systems will be asked to enable Software
Collections (SCL) repository so Python 3.6 can be installed. certbot-auto can
enable the SCL repo for you on CentOS 6 while users on other RHEL 6 based
systems will be asked to do this manually.
* `--server` may now be combined with `--dry-run`. Certbot will, as before, use the
staging server instead of the live server when `--dry-run` is used.
* `--dry-run` now requests fresh authorizations every time, fixing the issue
where it was prone to falsely reporting success.
* Updated certbot-dns-google to depend on newer versions of
google-api-python-client and oauth2client.
* The OS detection logic again uses distro library for Linux OSes
* certbot.plugins.common.TLSSNI01 has been deprecated and will be removed in a
future release.
* CLI flags --tls-sni-01-port and --tls-sni-01-address have been removed.
* The values tls-sni and tls-sni-01 for the --preferred-challenges flag are no
longer accepted.
* Removed the flags: `--agree-dev-preview`, `--dialog`, and `--apache-init-script`
* acme.standalone.BaseRequestHandlerWithLogging and
acme.standalone.simple_tls_sni_01_server have been deprecated and will be
removed in a future release of the library.
* certbot-dns-rfc2136 now use TCP to query SOA records.

### Fixed

More details about these changes can be found on our GitHub repo.

## 0.39.0 - 2019-10-01

### Added

* Support for Python 3.8 was added to Certbot and all of its components.
* Support for CentOS 8 was added to certbot-auto.

### Changed

* Don't send OCSP requests for expired certificates
* Return to using platform.linux_distribution instead of distro.linux_distribution in OS fingerprinting for Python < 3.8
* Updated the Nginx plugin's TLS configuration to keep support for some versions of IE11.

### Fixed

* Fixed OS detection in the Apache plugin on RHEL 6.

More details about these changes can be found on our GitHub repo.

## 0.38.0 - 2019-09-03

### Added

* Disable session tickets for Nginx users when appropriate.

### Changed

* If Certbot fails to rollback your server configuration, the error message
links to the Let's Encrypt forum. Change the link to the Help category now
that the Server category has been closed.
* Replace platform.linux_distribution with distro.linux_distribution as a step
towards Python 3.8 support in Certbot.

### Fixed

* Fixed OS detection in the Apache plugin on Scientific Linux.

More details about these changes can be found on our GitHub repo.

## 0.37.2 - 2019-08-21

* Stop disabling TLS session tickets in Nginx as it caused TLS failures on
some systems.

More details about these changes can be found on our GitHub repo.

## 0.37.1 - 2019-08-08

### Fixed

* Stop disabling TLS session tickets in Apache as it caused TLS failures on
some systems.

More details about these changes can be found on our GitHub repo.

## 0.37.0 - 2019-08-07

### Added

* Turn off session tickets for apache plugin by default
* acme: Authz deactivation added to `acme` module.

### Changed

* Follow updated Mozilla recommendations for Nginx ssl_protocols, ssl_ciphers,
and ssl_prefer_server_ciphers

### Fixed

* Fix certbot-auto failures on RHEL 8.

More details about these changes can be found on our GitHub repo.

## 0.36.0 - 2019-07-11

### Added

* Turn off session tickets for nginx plugin by default
* Added missing error types from RFC8555 to acme

### Changed

* Support for Ubuntu 14.04 Trusty has been removed.
* Update the 'manage your account' help to be more generic.
* The error message when Certbot's Apache plugin is unable to modify your
Apache configuration has been improved.
* Certbot's config_changes subcommand has been deprecated and will be
removed in a future release.
* `certbot config_changes` no longer accepts a --num parameter.
* The functions `certbot.plugins.common.Installer.view_config_changes` and
`certbot.reverter.Reverter.view_config_changes` have been deprecated and will
be removed in a future release.

### Fixed

* Replace some unnecessary platform-specific line separation.

More details about these changes can be found on our GitHub repo.

## 0.35.1 - 2019-06-10

### Fixed

* Support for specifying an authoritative base domain in our dns-rfc2136 plugin
has been removed. This feature was added in our last release but had a bug
which caused the plugin to fail so the feature has been removed until it can
be added properly.

Despite us having broken lockstep, we are continuing to release new versions of
all Certbot components during releases for the time being, however, the only
package with changes other than its version number was:

* certbot-dns-rfc2136

More details about these changes can be found on our GitHub repo.

## 0.35.0 - 2019-06-05

### Added

* dns_rfc2136 plugin now supports explicitly specifying an authoritative
base domain for cases when the automatic method does not work (e.g.
Split horizon DNS)

### Changed

* The `--preferred-chain` flag now only checks the Issuer Common Name of the
topmost (closest to the root) certificate in the chain, instead of checking
every certificate in the chain.
See [#8577](https://github.com/certbot/certbot/issues/8577).

### Fixed

* Renewal parameter `webroot_path` is always saved, avoiding some regressions
when `webroot` authenticator plugin is invoked with no challenge to perform.
* Certbot now accepts OCSP responses when an explicit authorized
responder, different from the issuer, is used to sign OCSP
responses.
* Scripts in Certbot hook directories are no longer executed when their
filenames end in a tilde.

* certbot
* certbot-dns-rfc2136

More details about these changes can be found on our GitHub repo.

## 0.34.2 - 2019-05-07

### Fixed

* certbot-auto no longer writes a check_permissions.py script at the root
of the filesystem.

Despite us having broken lockstep, we are continuing to release new versions of
all Certbot components during releases for the time being, however, the only
changes in this release were to certbot-auto.

More details about these changes can be found on our GitHub repo.

## 0.34.1 - 2019-05-06

### Fixed

* certbot-auto no longer prints a blank line when there are no permissions
problems.

More details about these changes can be found on our GitHub repo.

## 0.34.0 - 2019-05-01

### Changed

* Apache plugin now tries to restart httpd on Fedora using systemctl if a
configuration test error is detected. This has to be done due to the way
Fedora now generates the self signed certificate files upon first
restart.
* Updated Certbot and its plugins to improve the handling of file system permissions
on Windows as a step towards adding proper Windows support to Certbot.
* Updated urllib3 to 1.24.2 in certbot-auto.
* Removed the fallback introduced with 0.32.0 in `acme` to retry a challenge response
with a `keyAuthorization` if sending the response without this field caused a
`malformed` error to be received from the ACME server.
* Linode DNS plugin now supports api keys created from their new panel
at [cloud.linode.com](https://cloud.linode.com)

### Fixed

* Fixed Google DNS Challenge issues when private zones exist
* Adding a warning noting that future versions of Certbot will automatically configure the
webserver so that all requests redirect to secure HTTPS access. You can control this
behavior and disable this warning with the --redirect and --no-redirect flags.
* certbot-auto now prints warnings when run as root with insecure file system
permissions. If you see these messages, you should fix the problem by
following the instructions at
https://community.letsencrypt.org/t/certbot-auto-deployment-best-practices/91979/,
however, these warnings can be disabled as necessary with the flag
--no-permissions-check.
* `acme` module uses now a POST-as-GET request to retrieve the registration
from an ACME v2 server
* Convert the tsig algorithm specified in the certbot_dns_rfc2136 configuration file to
all uppercase letters before validating. This makes the value in the config case
insensitive.

* acme
* certbot
* certbot-apache
* certbot-dns-cloudflare
* certbot-dns-cloudxns
* certbot-dns-digitalocean
* certbot-dns-dnsimple
* certbot-dns-dnsmadeeasy
* certbot-dns-gehirn
* certbot-dns-google
* certbot-dns-linode
* certbot-dns-luadns
* certbot-dns-nsone
* certbot-dns-ovh
* certbot-dns-rfc2136
* certbot-dns-route53
* certbot-dns-sakuracloud
* certbot-nginx

More details about these changes can be found on our GitHub repo.

## 0.33.1 - 2019-04-04

### Fixed

* A bug causing certbot-auto to print warnings or crash on some RHEL based
systems has been resolved.

More details about these changes can be found on our GitHub repo.

## 0.33.0 - 2019-04-03

### Added

* Fedora 29+ is now supported by certbot-auto. Since Python 2.x is on a deprecation
path in Fedora, certbot-auto will install and use Python 3.x on Fedora 29+.
* CLI flag `--https-port` has been added for Nginx plugin exclusively, and replaces
`--tls-sni-01-port`. It defines the HTTPS port the Nginx plugin will use while
setting up a new SSL vhost. By default the HTTPS port is 443.

### Changed

* Support for TLS-SNI-01 has been removed from all official Certbot plugins.
* Attributes related to the TLS-SNI-01 challenge in `acme.challenges` and `acme.standalone`
modules are deprecated and will be removed soon.
* CLI flags `--tls-sni-01-port` and `--tls-sni-01-address` are now no-op, will
generate a deprecation warning if used, and will be removed soon.
* Options `tls-sni` and `tls-sni-01` in `--preferred-challenges` flag are now no-op,
will generate a deprecation warning if used, and will be removed soon.
* CLI flag `--standalone-supported-challenges` has been removed.

### Fixed

* Certbot uses the Python library cryptography for OCSP when cryptography>=2.5
is installed. We fixed a bug in Certbot causing it to interpret timestamps in
the OCSP response as being in the local timezone rather than UTC.
* Issue causing the default CentOS 6 TLS configuration to ignore some of the
HTTPS VirtualHosts created by Certbot. mod_ssl loading is now moved to main
http.conf for this environment where possible.

* acme
* certbot
* certbot-apache
* certbot-nginx

More details about these changes can be found on our GitHub repo.

## 0.32.0 - 2019-03-06

### Added

* If possible, Certbot uses built-in support for OCSP from recent cryptography
versions instead of the OpenSSL binary: as a consequence Certbot does not need
the OpenSSL binary to be installed anymore if cryptography>=2.5 is installed.

### Changed

* Certbot and its acme module now depend on josepy>=1.1.0 to avoid printing the
warnings described at https://github.com/certbot/josepy/issues/13.
* Apache plugin now respects CERTBOT_DOCS environment variable when adding
command line defaults.
* The running of manual plugin hooks is now always included in Certbot's log
output.
* Tests execution for certbot, certbot-apache and certbot-nginx packages now relies on pytest.
* An ACME CA server may return a "Retry-After" HTTP header on authorization polling, as
specified in the ACME protocol, to indicate when the next polling should occur. Certbot now
reads this header if set and respect its value.
* The `acme` module avoids sending the `keyAuthorization` field in the JWS
payload when responding to a challenge as the field is not included in the
current ACME protocol. To ease the migration path for ACME CA servers,
Certbot and its `acme` module will first try the request without the
`keyAuthorization` field but will temporarily retry the request with the
field included if a `malformed` error is received. This fallback will be
removed in version 0.34.0.

* acme
* certbot
* certbot-apache
* certbot-nginx

More details about these changes can be found on our GitHub repo.

## 0.31.0 - 2019-02-07

### Added

* Avoid reprocessing challenges that are already validated
when a certificate is issued.
* Support for initiating (but not solving end-to-end) TLS-ALPN-01 challenges
with the `acme` module.

### Changed

* Certbot's official Docker images are now based on Alpine Linux 3.9 rather
than 3.7. The new version comes with OpenSSL 1.1.1.
* Lexicon-based DNS plugins are now fully compatible with Lexicon 3.x (support
on 2.x branch is maintained).
* Apache plugin now attempts to configure all VirtualHosts matching requested
domain name instead of only a single one when answering the HTTP-01 challenge.

### Fixed

* Fixed accessing josepy contents through acme.jose when the full acme.jose
path is used.
* Clarify behavior for deleting certs as part of revocation.

* acme
* certbot
* certbot-apache
* certbot-dns-cloudxns
* certbot-dns-dnsimple
* certbot-dns-dnsmadeeasy
* certbot-dns-gehirn
* certbot-dns-linode
* certbot-dns-luadns
* certbot-dns-nsone
* certbot-dns-ovh
* certbot-dns-sakuracloud

More details about these changes can be found on our GitHub repo.

## 0.30.2 - 2019-01-25

### Fixed

* Update the version of setuptools pinned in certbot-auto to 40.6.3 to
solve installation problems on newer OSes.

Despite us having broken lockstep, we are continuing to release new versions of
all Certbot components during releases for the time being, however, this
release only affects certbot-auto.

More details about these changes can be found on our GitHub repo.

## 0.30.1 - 2019-01-24

### Fixed

* Always download the pinned version of pip in pipstrap to address breakages
* Rename old,default.conf to old-and-default.conf to address commas in filenames
breaking recent versions of pip.
* Add VIRTUALENV_NO_DOWNLOAD=1 to all calls to virtualenv to address breakages
from venv downloading the latest pip

* certbot-apache

More details about these changes can be found on our GitHub repo.

## 0.30.0 - 2019-01-02

### Added

* Added the `update_account` subcommand for account management commands.

### Changed

* Copied account management functionality from the `register` subcommand
to the `update_account` subcommand.
* Marked usage `register --update-registration` for deprecation and
removal in a future release.

### Fixed

* Older modules in the josepy library can now be accessed through acme.jose
like it could in previous versions of acme. This is only done to preserve
backwards compatibility and support for doing this with new modules in josepy
will not be added. Users of the acme library should switch to using josepy
directly if they haven't done so already.

* acme

More details about these changes can be found on our GitHub repo.

## 0.29.1 - 2018-12-05

### Added

### Changed

### Fixed

* The default work and log directories have been changed back to
/var/lib/letsencrypt and /var/log/letsencrypt respectively.

* certbot

More details about these changes can be found on our GitHub repo.

## 0.29.0 - 2018-12-05

### Added

* Noninteractive renewals with `certbot renew` (those not started from a
terminal) now randomly sleep 1-480 seconds before beginning work in
order to spread out load spikes on the server side.
* Added External Account Binding support in cli and acme library.
Command line arguments --eab-kid and --eab-hmac-key added.

### Changed

* Private key permissioning changes: Renewal preserves existing group mode
& gid of previous private key material. Private keys for new
lineages (i.e. new certs, not renewed) default to 0o600.

### Fixed

* Update code and dependencies to clean up Resource and Deprecation Warnings.
* Only depend on imgconverter extension for Sphinx >= 1.6

* acme
* certbot
* certbot-apache
* certbot-dns-cloudflare
* certbot-dns-digitalocean
* certbot-dns-google
* certbot-nginx

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/62?closed=1

## 0.28.0 - 2018-11-7

### Added

* `revoke` accepts `--cert-name`, and doesn't accept both `--cert-name` and `--cert-path`.
* Use the ACMEv2 newNonce endpoint when a new nonce is needed, and newNonce is available in the directory.

### Changed

* Removed documentation mentions of `#letsencrypt` IRC on Freenode.
* Write README to the base of (config-dir)/live directory
* `--manual` will explicitly warn users that earlier challenges should remain in place when setting up subsequent challenges.
* Warn when using deprecated acme.challenges.TLSSNI01
* Log warning about TLS-SNI deprecation in Certbot
* Stop preferring TLS-SNI in the Apache, Nginx, and standalone plugins
* OVH DNS plugin now relies on Lexicon>=2.7.14 to support HTTP proxies
* Default time the Linode plugin waits for DNS changes to propagate is now 1200 seconds.

### Fixed

* Match Nginx parser update in allowing variable names to start with `${`.
* Fix ranking of vhosts in Nginx so that all port-matching vhosts come first
* Correct OVH integration tests on machines without internet access.
* Stop caching the results of ipv6_info in http01.py
* Test fix for Route53 plugin to prevent boto3 making outgoing connections.
* The grammar used by Augeas parser in Apache plugin was updated to fix various parsing errors.
* The CloudXNS, DNSimple, DNS Made Easy, Gehirn, Linode, LuaDNS, NS1, OVH, and
Sakura Cloud DNS plugins are now compatible with Lexicon 3.0+.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/59?closed=1

## 0.27.1 - 2018-09-06

### Fixed

* Fixed parameter name in OpenSUSE overrides for default parameters in the
Apache plugin. Certbot on OpenSUSE works again.

* certbot-apache

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/60?closed=1

## 0.27.0 - 2018-09-05

### Added

* The Apache plugin now accepts the parameter --apache-ctl which can be
used to configure the path to the Apache control script.

### Changed

* When using `acme.client.ClientV2` (or
`acme.client.BackwardsCompatibleClientV2` with an ACME server that supports a
newer version of the ACME protocol), an `acme.errors.ConflictError` will be
raised if you try to create an ACME account with a key that has already been
used. Previously, a JSON parsing error was raised in this scenario when using
the library with Let's Encrypt's ACMEv2 endpoint.

### Fixed

* When Apache is not installed, Certbot's Apache plugin no longer prints
messages about being unable to find apachectl to the terminal when the plugin
is not selected.
* If you're using the Apache plugin with the --apache-vhost-root flag set to a
directory containing a disabled virtual host for the domain you're requesting
a certificate for, the virtual host will now be temporarily enabled if
necessary to pass the HTTP challenge.
* The documentation for the Certbot package can now be built using Sphinx 1.6+.
* You can now call `query_registration` without having to first call
`new_account` on `acme.client.ClientV2` objects.
* The requirement of `setuptools>=1.0` has been removed from `certbot-dns-ovh`.
* Names in certbot-dns-sakuracloud's tests have been updated to refer to Sakura
Cloud rather than NS1 whose plugin certbot-dns-sakuracloud was based on.

* acme
* certbot
* certbot-apache
* certbot-dns-ovh
* certbot-dns-sakuracloud

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/57?closed=1

## 0.26.1 - 2018-07-17

### Fixed

* Fix a bug that was triggered when users who had previously manually set `--server` to get ACMEv2 certs tried to renew ACMEv1 certs.

Despite us having broken lockstep, we are continuing to release new versions of all Certbot components during releases for the time being, however, the only package with changes other than its version number was:

* certbot

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/58?closed=1

## 0.26.0 - 2018-07-11

### Added

* A new security enhancement which we're calling AutoHSTS has been added to
Certbot's Apache plugin. This enhancement configures your webserver to send a
HTTP Strict Transport Security header with a low max-age value that is slowly
increased over time. The max-age value is not increased to a large value
until you've successfully managed to renew your certificate. This enhancement
can be requested with the --auto-hsts flag.
* New official DNS plugins have been created for Gehirn Infrastructure Service,
Linode, OVH, and Sakura Cloud. These plugins can be found on our Docker Hub
page at https://hub.docker.com/u/certbot and on PyPI.
* The ability to reuse ACME accounts from Let's Encrypt's ACMEv1 endpoint on
Let's Encrypt's ACMEv2 endpoint has been added.
* Certbot and its components now support Python 3.7.
* Certbot's install subcommand now allows you to interactively choose which
certificate to install from the list of certificates managed by Certbot.
* Certbot now accepts the flag `--no-autorenew` which causes any obtained
certificates to not be automatically renewed when it approaches expiration.
* Support for parsing the TLS-ALPN-01 challenge has been added back to the acme
library.

### Changed

* Certbot's default ACME server has been changed to Let's Encrypt's ACMEv2
endpoint. By default, this server will now be used for both new certificate
lineages and renewals.
* The Nginx plugin is no longer marked labeled as an "Alpha" version.
* The `prepare` method of Certbot's plugins is no longer called before running
"Updater" enhancements that are run on every invocation of `certbot renew`.

Despite us having broken lockstep, we are continuing to release new versions of
all Certbot components during releases for the time being, however, the only
packages with functional changes were:

* acme
* certbot
* certbot-apache
* certbot-dns-gehirn
* certbot-dns-linode
* certbot-dns-ovh
* certbot-dns-sakuracloud
* certbot-nginx

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/55?closed=1

## 0.25.1 - 2018-06-13

### Fixed

* TLS-ALPN-01 support has been removed from our acme library. Using our current
dependencies, we are unable to provide a correct implementation of this
challenge so we decided to remove it from the library until we can provide
proper support.
* Issues causing test failures when running the tests in the acme package with
pytest<3.0 has been resolved.
* certbot-nginx now correctly depends on acme>=0.25.0.

Despite us having broken lockstep, we are continuing to release new versions of
all Certbot components during releases for the time being, however, the only
packages with changes other than their version number were:

* acme
* certbot-nginx

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/56?closed=1

## 0.25.0 - 2018-06-06

### Added

* Support for the ready status type was added to acme. Without this change,
Certbot and acme users will begin encountering errors when using Let's
Encrypt's ACMEv2 API starting on June 19th for the staging environment and
July 5th for production. See
https://community.letsencrypt.org/t/acmev2-order-ready-status/62866 for more
information.
* Certbot now accepts the flag --reuse-key which will cause the same key to be
used in the certificate when the lineage is renewed rather than generating a
new key.
* You can now add multiple email addresses to your ACME account with Certbot by
providing a comma separated list of emails to the --email flag.
* Support for Let's Encrypt's upcoming TLS-ALPN-01 challenge was added to acme.
For more information, see
https://community.letsencrypt.org/t/tls-alpn-validation-method/63814/1.
* acme now supports specifying the source address to bind to when sending
outgoing connections. You still cannot specify this address using Certbot.
* If you run Certbot against Let's Encrypt's ACMEv2 staging server but don't
already have an account registered at that server URL, Certbot will
automatically reuse your staging account from Let's Encrypt's ACMEv1 endpoint
if it exists.
* Interfaces were added to Certbot allowing plugins to be called at additional
points. The `GenericUpdater` interface allows plugins to perform actions
every time `certbot renew` is run, regardless of whether any certificates are
due for renewal, and the `RenewDeployer` interface allows plugins to perform
actions when a certificate is renewed. See `certbot.interfaces` for more
information.

### Changed

* When running Certbot with --dry-run and you don't already have a staging
account, the created account does not contain an email address even if one
was provided to avoid expiration emails from Let's Encrypt's staging server.
* certbot-nginx does a better job of automatically detecting the location of
Nginx's configuration files when run on BSD based systems.
* acme now requires and uses pytest when running tests with setuptools with
`python setup.py test`.
* `certbot config_changes` no longer waits for user input before exiting.

### Fixed

* Misleading log output that caused users to think that Certbot's standalone
plugin failed to bind to a port when performing a challenge has been
corrected.
* An issue where certbot-nginx would fail to enable HSTS if the server block
already had an `add_header` directive has been resolved.
* certbot-nginx now does a better job detecting the server block to base the
configuration for TLS-SNI challenges on.

Despite us having broken lockstep, we are continuing to release new versions of
all Certbot components during releases for the time being, however, the only
packages with functional changes were:

* acme
* certbot
* certbot-apache
* certbot-nginx

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/54?closed=1

## 0.24.0 - 2018-05-02

### Added

* certbot now has an enhance subcommand which allows you to configure security
enhancements like HTTP to HTTPS redirects, OCSP stapling, and HSTS without
reinstalling a certificate.
* certbot-dns-rfc2136 now allows the user to specify the port to use to reach
the DNS server in its credentials file.
* acme now parses the wildcard field included in authorizations so it can be
used by users of the library.

### Changed

* certbot-dns-route53 used to wait for each DNS update to propagate before
sending the next one, but now it sends all updates before waiting which
speeds up issuance for multiple domains dramatically.
* Certbot's official Docker images are now based on Alpine Linux 3.7 rather
than 3.4 because 3.4 has reached its end-of-life.
* We've doubled the time Certbot will spend polling authorizations before
timing out.
* The level of the message logged when Certbot is being used with
non-standard paths warning that crontabs for renewal included in Certbot
packages from OS package managers may not work has been reduced. This stops
the message from being written to stderr every time `certbot renew` runs.

### Fixed

* certbot-auto now works with Python 3.6.

* acme
* certbot
* certbot-apache
* certbot-dns-digitalocean (only style improvements to tests)
* certbot-dns-rfc2136

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/52?closed=1

## 0.23.0 - 2018-04-04

### Added

* Support for OpenResty was added to the Nginx plugin.

### Changed

* The timestamps in Certbot's logfiles now use the system's local time zone
rather than UTC.
* Certbot's DNS plugins that use Lexicon now rely on Lexicon>=2.2.1 to be able
to create and delete multiple TXT records on a single domain.
* certbot-dns-google's test suite now works without an internet connection.

### Fixed

* Removed a small window that if during which an error occurred, Certbot
wouldn't clean up performed challenges.
* The parameters `default` and `ipv6only` are now removed from `listen`
directives when creating a new server block in the Nginx plugin.
* `server_name` directives enclosed in quotation marks in Nginx are now properly
supported.
* Resolved an issue preventing the Apache plugin from starting Apache when it's
not currently running on RHEL and Gentoo based systems.

* certbot
* certbot-apache
* certbot-dns-cloudxns
* certbot-dns-dnsimple
* certbot-dns-dnsmadeeasy
* certbot-dns-google
* certbot-dns-luadns
* certbot-dns-nsone
* certbot-dns-rfc2136
* certbot-nginx

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/50?closed=1

## 0.22.2 - 2018-03-19

### Fixed

* A type error introduced in 0.22.1 that would occur during challenge cleanup
when a Certbot plugin raises an exception while trying to complete the
challenge was fixed.

* certbot

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/53?closed=1

## 0.22.1 - 2018-03-19

### Changed

* The ACME server used with Certbot's --dry-run and --staging flags is now
Let's Encrypt's ACMEv2 staging server which allows people to also test ACMEv2
features with these flags.

### Fixed

* The HTTP Content-Type header is now set to the correct value during
certificate revocation with new versions of the ACME protocol.
* When using Certbot with Let's Encrypt's ACMEv2 server, it would add a blank
line to the top of chain.pem and between the certificates in fullchain.pem
for each lineage. These blank lines have been removed.
* Resolved a bug that caused Certbot's --allow-subset-of-names flag not to
work.
* Fixed a regression in acme.client.Client that caused the class to not work
when it was initialized without a ClientNetwork which is done by some of the
other projects using our ACME library.

* acme
* certbot

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/51?closed=1

## 0.22.0 - 2018-03-07

### Added

* Support for obtaining wildcard certificates and a newer version of the ACME
protocol such as the one implemented by Let's Encrypt's upcoming ACMEv2
endpoint was added to Certbot and its ACME library. Certbot still works with
older ACME versions and will automatically change the version of the protocol
used based on the version the ACME CA implements.
* The Apache and Nginx plugins are now able to automatically install a wildcard
certificate to multiple virtual hosts that you select from your server
configuration.
* The `certbot install` command now accepts the `--cert-name` flag for
selecting a certificate.
* `acme.client.BackwardsCompatibleClientV2` was added to Certbot's ACME library
which automatically handles most of the differences between new and old ACME
versions. `acme.client.ClientV2` is also available for people who only want
to support one version of the protocol or want to handle the differences
between versions themselves.
* certbot-auto now supports the flag --install-only which has the script
install Certbot and its dependencies and exit without invoking Certbot.
* Support for issuing a single certificate for a wildcard and base domain was
added to our Google Cloud DNS plugin. To do this, we now require your API
credentials have additional permissions, however, your credentials will
already have these permissions unless you defined a custom role with fewer
permissions than the standard DNS administrator role provided by Google.
These permissions are also only needed for the case described above so it
will continue to work for existing users. For more information about the
permissions changes, see the documentation in the plugin.

### Changed

* We have broken lockstep between our ACME library, Certbot, and its plugins.
This means that the different components do not need to be the same version
to work together like they did previously. This makes packaging easier
because not every piece of Certbot needs to be repackaged to ship a change to
a subset of its components.
* Support for Python 2.6 and Python 3.3 has been removed from ACME, Certbot,
Certbot's plugins, and certbot-auto. If you are using certbot-auto on a RHEL
6 based system, it will walk you through the process of installing Certbot
with Python 3 and refuse to upgrade to a newer version of Certbot until you
have done so.
* Certbot's components now work with older versions of setuptools to simplify
packaging for EPEL 7.

### Fixed

* Issues caused by Certbot's Nginx plugin adding multiple ipv6only directives
has been resolved.
* A problem where Certbot's Apache plugin would add redundant include
directives for the TLS configuration managed by Certbot has been fixed.
* Certbot's webroot plugin now properly deletes any directories it creates.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/48?closed=1

## 0.21.1 - 2018-01-25

### Fixed

* When creating an HTTP to HTTPS redirect in Nginx, we now ensure the Host
header of the request is set to an expected value before redirecting users to
the domain found in the header. The previous way Certbot configured Nginx
redirects was a potential security issue which you can read more about at
https://community.letsencrypt.org/t/security-issue-with-redirects-added-by-certbots-nginx-plugin/51493.
* Fixed a problem where Certbot's Apache plugin could fail HTTP-01 challenges
if basic authentication is configured for the domain you request a
certificate for.
* certbot-auto --no-bootstrap now properly tries to use Python 3.4 on RHEL 6
based systems rather than Python 2.6.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/49?closed=1

## 0.21.0 - 2018-01-17

### Added

* Support for the HTTP-01 challenge type was added to our Apache and Nginx
plugins. For those not aware, Let's Encrypt disabled the TLS-SNI-01 challenge
type which was what was previously being used by our Apache and Nginx plugins
last week due to a security issue. For more information about Let's Encrypt's
change, click
[here](https://community.letsencrypt.org/t/2018-01-11-update-regarding-acme-tls-sni-and-shared-hosting-infrastructure/50188).
Our Apache and Nginx plugins will automatically switch to use HTTP-01 so no
changes need to be made to your Certbot configuration, however, you should
make sure your server is accessible on port 80 and isn't behind an external
proxy doing things like redirecting all traffic from HTTP to HTTPS. HTTP to
HTTPS redirects inside Apache and Nginx are fine.
* IPv6 support was added to the Nginx plugin.
* Support for automatically creating server blocks based on the default server
block was added to the Nginx plugin.
* The flags --delete-after-revoke and --no-delete-after-revoke were added
allowing users to control whether the revoke subcommand also deletes the
certificates it is revoking.

### Changed

* We deprecated support for Python 2.6 and Python 3.3 in Certbot and its ACME
library. Support for these versions of Python will be removed in the next
major release of Certbot. If you are using certbot-auto on a RHEL 6 based
system, it will guide you through the process of installing Python 3.
* We split our implementation of JOSE (Javascript Object Signing and
Encryption) out of our ACME library and into a separate package named josepy.
This package is available on [PyPI](https://pypi.python.org/pypi/josepy) and
on [GitHub](https://github.com/certbot/josepy).
* We updated the ciphersuites used in Apache to the new [values recommended by
Mozilla](https://wiki.mozilla.org/Security/Server_Side_TLS#Intermediate_compatibility_.28default.29).
The major change here is adding ChaCha20 to the list of supported
ciphersuites.

### Fixed

* An issue with our Apache plugin on Gentoo due to differences in their
apache2ctl command have been resolved.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/47?closed=1

## 0.20.0 - 2017-12-06

### Added

* Certbot's ACME library now recognizes URL fields in challenge objects in
preparation for Let's Encrypt's new ACME endpoint. The value is still
accessible in our ACME library through the name "uri".

### Changed

* The Apache plugin now parses some distro specific Apache configuration files
on non-Debian systems allowing it to get a clearer picture on the running
configuration. Internally, these changes were structured so that external
contributors can easily write patches to make the plugin work in new Apache
configurations.
* Certbot better reports network failures by removing information about
connection retries from the error output.
* An unnecessary question when using Certbot's webroot plugin interactively has
been removed.

### Fixed

* Certbot's NGINX plugin no longer sometimes incorrectly reports that it was
unable to deploy a HTTP->HTTPS redirect when requesting Certbot to enable a
redirect for multiple domains.
* Problems where the Apache plugin was failing to find directives and
duplicating existing directives on openSUSE have been resolved.
* An issue running the test shipped with Certbot and some our DNS plugins with
older versions of mock have been resolved.
* On some systems, users reported strangely interleaved output depending on
when stdout and stderr were flushed. This problem was resolved by having
Certbot regularly flush these streams.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/44?closed=1

## 0.19.0 - 2017-10-04

### Added

* Certbot now has renewal hook directories where executable files can be placed
for Certbot to run with the renew subcommand. Pre-hooks, deploy-hooks, and
post-hooks can be specified in the renewal-hooks/pre, renewal-hooks/deploy,
and renewal-hooks/post directories respectively in Certbot's configuration
directory (which is /etc/letsencrypt by default). Certbot will automatically
create these directories when it is run if they do not already exist.
* After revoking a certificate with the revoke subcommand, Certbot will offer
to delete the lineage associated with the certificate. When Certbot is run
with --non-interactive, it will automatically try to delete the associated
lineage.
* When using Certbot's Google Cloud DNS plugin on Google Compute Engine, you no
longer have to provide a credential file to Certbot if you have configured
sufficient permissions for the instance which Certbot can automatically
obtain using Google's metadata service.

### Changed

* When deleting certificates interactively using the delete subcommand, Certbot
will now allow you to select multiple lineages to be deleted at once.
* Certbot's Apache plugin no longer always parses Apache's sites-available on
Debian based systems and instead only parses virtual hosts included in your
Apache configuration. You can provide an additional directory for Certbot to
parse using the command line flag --apache-vhost-root.

### Fixed

* The plugins subcommand can now be run without root access.
* certbot-auto now includes a timeout when updating itself so it no longer
hangs indefinitely when it is unable to connect to the external server.
* An issue where Certbot's Apache plugin would sometimes fail to deploy a
certificate on Debian based systems if mod_ssl wasn't already enabled has
been resolved.
* A bug in our Docker image where the certificates subcommand could not report
if certificates maintained by Certbot had been revoked has been fixed.
* Certbot's RFC 2136 DNS plugin (for use with software like BIND) now properly
performs DNS challenges when the domain being verified contains a CNAME
record.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/43?closed=1

## 0.18.2 - 2017-09-20

### Fixed

* An issue where Certbot's ACME module would raise an AttributeError trying to
create self-signed certificates when used with pyOpenSSL 17.3.0 has been
resolved. For Certbot users with this version of pyOpenSSL, this caused
Certbot to crash when performing a TLS SNI challenge or when the Nginx plugin
tried to create an SSL server block.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/46?closed=1

## 0.18.1 - 2017-09-08

### Fixed

* If certbot-auto was running as an unprivileged user and it upgraded from
0.17.0 to 0.18.0, it would crash with a permissions error and would need to
be run again to successfully complete the upgrade. This has been fixed and
certbot-auto should upgrade cleanly to 0.18.1.
* Certbot usually uses "certbot-auto" or "letsencrypt-auto" in error messages
and the User-Agent string instead of "certbot" when you are using one of
these wrapper scripts. Proper detection of this was broken with Certbot's new
installation path in /opt in 0.18.0 but this problem has been resolved.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/45?closed=1

## 0.18.0 - 2017-09-06

### Added

* The Nginx plugin now configures Nginx to use 2048-bit Diffie-Hellman
parameters. Java 6 clients do not support Diffie-Hellman parameters larger
than 1024 bits, so if you need to support these clients you will need to
manually modify your Nginx configuration after using the Nginx installer.

### Changed

* certbot-auto now installs Certbot in directories under `/opt/eff.org`. If you
had an existing installation from certbot-auto, a symlink is created to the
new directory. You can configure certbot-auto to use a different path by
setting the environment variable VENV_PATH.
* The Nginx plugin can now be selected in Certbot's interactive output.
* Output verbosity of renewal failures when running with `--quiet` has been
reduced.
* The default revocation reason shown in Certbot help output now is a human
readable string instead of a numerical code.
* Plugin selection is now included in normal terminal output.

### Fixed

* A newer version of ConfigArgParse is now installed when using certbot-auto
causing values set to false in a Certbot INI configuration file to be handled
intuitively. Setting a boolean command line flag to false is equivalent to
not including it in the configuration file at all.
* New naming conventions preventing certbot-auto from installing OS
dependencies on Fedora 26 have been resolved.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/42?closed=1

## 0.17.0 - 2017-08-02

### Added

* Support in our nginx plugin for modifying SSL server blocks that do
not contain certificate or key directives.
* A `--max-log-backups` flag to allow users to configure or even completely
disable Certbot's built in log rotation.
* A `--user-agent-comment` flag to allow people who build tools around Certbot
to differentiate their user agent string by adding a comment to its default
value.

### Changed

* Due to some awesome work by
[cryptography project](https://github.com/pyca/cryptography), compilation can
now be avoided on most systems when using certbot-auto. This eliminates many
problems people have had in the past such as running out of memory, having
invalid headers/libraries, and changes to the OS packages on their system
after compilation breaking Certbot.
* The `--renew-hook` flag has been hidden in favor of `--deploy-hook`. This new
flag works exactly the same way except it is always run when a certificate is
issued rather than just when it is renewed.
* We have started printing deprecation warnings in certbot-auto for
experimentally supported systems with OS packages available.
* A certificate lineage's name is included in error messages during renewal.

### Fixed

* Encoding errors that could occur when parsing error messages from the ACME
server containing Unicode have been resolved.
* certbot-auto no longer prints misleading messages about there being a newer
pip version available when installation fails.
* Certbot's ACME library now properly extracts domains from critical SAN
extensions.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.17.0+is%3Aclosed

## 0.16.0 - 2017-07-05

### Added

* A plugin for performing DNS challenges using dynamic DNS updates as defined
in RFC 2316. This plugin is packaged separately from Certbot and is available
at https://pypi.python.org/pypi/certbot-dns-rfc2136. It supports Python 2.6,
2.7, and 3.3+. At this time, there isn't a good way to install this plugin
when using certbot-auto, but this should change in the near future.
* Plugins for performing DNS challenges for the providers
[DNS Made Easy](https://pypi.python.org/pypi/certbot-dns-dnsmadeeasy) and
[LuaDNS](https://pypi.python.org/pypi/certbot-dns-luadns). These plugins are
packaged separately from Certbot and support Python 2.7 and 3.3+. Currently,
there isn't a good way to install these plugins when using certbot-auto,
but that should change soon.
* Support for performing TLS-SNI-01 challenges when using the manual plugin.
* Automatic detection of Arch Linux in the Apache plugin providing better
default settings for the plugin.

### Changed

* The text of the interactive question about whether a redirect from HTTP to
HTTPS should be added by Certbot has been rewritten to better explain the
choices to the user.
* Simplified HTTP challenge instructions in the manual plugin.

### Fixed

* Problems performing a dry run when using the Nginx plugin have been fixed.
* Resolved an issue where certbot-dns-digitalocean's test suite would sometimes
fail when ran using Python 3.
* On some systems, previous versions of certbot-auto would error out with a
message about a missing hash for setuptools. This has been fixed.
* A bug where Certbot would sometimes not print a space at the end of an
interactive prompt has been resolved.
* Nonfatal tracebacks are no longer shown in rare cases where Certbot
encounters an exception trying to close its TCP connection with the ACME
server.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.16.0+is%3Aclosed

## 0.15.0 - 2017-06-08

### Added

* Plugins for performing DNS challenges for popular providers. Like the Apache
and Nginx plugins, these plugins are packaged separately and not included in
Certbot by default. So far, we have plugins for
[Amazon Route 53](https://pypi.python.org/pypi/certbot-dns-route53),
[Cloudflare](https://pypi.python.org/pypi/certbot-dns-cloudflare),
[DigitalOcean](https://pypi.python.org/pypi/certbot-dns-digitalocean), and
[Google Cloud](https://pypi.python.org/pypi/certbot-dns-google) which all
work on Python 2.6, 2.7, and 3.3+. Additionally, we have plugins for
[CloudXNS](https://pypi.python.org/pypi/certbot-dns-cloudxns),
[DNSimple](https://pypi.python.org/pypi/certbot-dns-dnsimple),
[NS1](https://pypi.python.org/pypi/certbot-dns-nsone) which work on Python
2.7 and 3.3+ (and not 2.6). Currently, there isn't a good way to install
these plugins when using `certbot-auto`, but that should change soon.
* IPv6 support in the standalone plugin. When performing a challenge, the
standalone plugin automatically handles listening for IPv4/IPv6 traffic based
on the configuration of your system.
* A mechanism for keeping your Apache and Nginx SSL/TLS configuration up to
date. When the Apache or Nginx plugins are used, they place SSL/TLS
configuration options in the root of Certbot's config directory
(`/etc/letsencrypt` by default). Now when a new version of these plugins run
on your system, they will automatically update the file to the newest
version if it is unmodified. If you manually modified the file, Certbot will
display a warning giving you a path to the updated file which you can use as
a reference to manually update your modified copy.
* `--http-01-address` and `--tls-sni-01-address` flags for controlling the
address Certbot listens on when using the standalone plugin.
* The command `certbot certificates` that lists certificates managed by Certbot
now performs additional validity checks to notify you if your files have
become corrupted.

### Changed

* Messages custom hooks print to `stdout` are now displayed by Certbot when not
running in `--quiet` mode.
* `jwk` and `alg` fields in JWS objects have been moved into the protected
header causing Certbot to more closely follow the latest version of the ACME
spec.

### Fixed

* Permissions on renewal configuration files are now properly preserved when
they are updated.
* A bug causing Certbot to display strange defaults in its help output when
using Python <= 2.7.4 has been fixed.
* Certbot now properly handles mixed case domain names found in custom CSRs.
* A number of poorly worded prompts and error messages.

### Removed

* Support for OpenSSL 1.0.0 in `certbot-auto` has been removed as we now pin a
newer version of `cryptography` which dropped support for this version.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.15.0+is%3Aclosed

## 0.14.2 - 2017-05-25

### Fixed

* Certbot 0.14.0 included a bug where Certbot would create a temporary log file
(usually in /tmp) if the program exited during argument parsing. If a user
provided -h/--help/help, --version, or an invalid command line argument,
Certbot would create this temporary log file. This was especially bothersome to
certbot-auto users as certbot-auto runs `certbot --version` internally to see
if the script needs to upgrade causing it to create at least one of these files
on every run. This problem has been resolved.

More details about this change can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.14.2+is%3Aclosed

## 0.14.1 - 2017-05-16

### Fixed

* Certbot now works with configargparse 0.12.0.
* Issues with the Apache plugin and Augeas 1.7+ have been resolved.
* A problem where the Nginx plugin would fail to install certificates on
systems that had the plugin's SSL/TLS options file from 7+ months ago has been
fixed.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.14.1+is%3Aclosed

## 0.14.0 - 2017-05-04

### Added

* Python 3.3+ support for all Certbot packages. `certbot-auto` still currently
only supports Python 2, but the `acme`, `certbot`, `certbot-apache`, and
`certbot-nginx` packages on PyPI now fully support Python 2.6, 2.7, and 3.3+.
* Certbot's Apache plugin now handles multiple virtual hosts per file.
* Lockfiles to prevent multiple versions of Certbot running simultaneously.

### Changed

* When converting an HTTP virtual host to HTTPS in Apache, Certbot only copies
the virtual host rather than the entire contents of the file it's contained
in.
* The Nginx plugin now includes SSL/TLS directives in a separate file located
in Certbot's configuration directory rather than copying the contents of the
file into every modified `server` block.

### Fixed

* Ensure logging is configured before parts of Certbot attempt to log any
messages.
* Support for the `--quiet` flag in `certbot-auto`.
* Reverted a change made in a previous release to make the `acme` and `certbot`
packages always depend on `argparse`. This dependency is conditional again on
the user's Python version.
* Small bugs in the Nginx plugin such as properly handling empty `server`
blocks and setting `server_names_hash_bucket_size` during challenges.

As always, a more complete list of changes can be found on GitHub:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.14.0+is%3Aclosed

## 0.13.0 - 2017-04-06

### Added

* `--debug-challenges` now pauses Certbot after setting up challenges for debugging.
* The Nginx parser can now handle all valid directives in configuration files.
* Nginx ciphersuites have changed to Mozilla Intermediate.
* `certbot-auto --no-bootstrap` provides the option to not install OS dependencies.

### Fixed

* `--register-unsafely-without-email` now respects `--quiet`.
* Hyphenated renewal parameters are now saved in renewal config files.
* `--dry-run` no longer persists keys and csrs.
* Certbot no longer hangs when trying to start Nginx in Arch Linux.
* Apache rewrite rules no longer double-encode characters.

A full list of changes is available on GitHub:
https://github.com/certbot/certbot/issues?q=is%3Aissue%20milestone%3A0.13.0%20is%3Aclosed%20

## 0.12.0 - 2017-03-02

### Added

* Certbot now allows non-camelcase Apache VirtualHost names.
* Certbot now allows more log messages to be silenced.

### Fixed

* Fixed a regression around using `--cert-name` when getting new certificates

More information about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue%20milestone%3A0.12.0

## 0.11.1 - 2017-02-01

### Fixed

* Resolved a problem where Certbot would crash while parsing command line
arguments in some cases.
* Fixed a typo.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/pulls?q=is%3Apr%20milestone%3A0.11.1%20is%3Aclosed

## 0.11.0 - 2017-02-01

### Added

* When using the standalone plugin while running Certbot interactively
and a required port is bound by another process, Certbot will give you
the option to retry to grab the port rather than immediately exiting.
* You are now able to deactivate your account with the Let's Encrypt
server using the `unregister` subcommand.
* When revoking a certificate using the `revoke` subcommand, you now
have the option to provide the reason the certificate is being revoked
to Let's Encrypt with `--reason`.

### Changed

* Providing `--quiet` to `certbot-auto` now silences package manager output.

### Removed

* Removed the optional `dnspython` dependency in our `acme` package.
Now the library does not support client side verification of the DNS
challenge.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.11.0+is%3Aclosed

## 0.10.2 - 2017-01-25

### Added

* If Certbot receives a request with a `badNonce` error, it now
automatically retries the request. Since nonces from Let's Encrypt expire,
this helps people performing the DNS challenge with the `manual` plugin
who may have to wait an extended period of time for their DNS changes to
propagate.

### Fixed

* Certbot now saves the `--preferred-challenges` values for renewal. Previously
these values were discarded causing a different challenge type to be used when
renewing certs in some cases.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.10.2+is%3Aclosed

## 0.10.1 - 2017-01-13

### Fixed

* Resolve problems where when asking Certbot to update a certificate at
an existing path to include different domain names, the old names would
continue to be used.
* Fix issues successfully running our unit test suite on some systems.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.10.1+is%3Aclosed

## 0.10.0 - 2017-01-11

## Added

* Added the ability to customize and automatically complete DNS and HTTP
domain validation challenges with the manual plugin. The flags
`--manual-auth-hook` and `--manual-cleanup-hook` can now be provided
when using the manual plugin to execute commands provided by the user to
perform and clean up challenges provided by the CA. This is best used in
complicated setups where the DNS challenge must be used or Certbot's
existing plugins cannot be used to perform HTTP challenges. For more
information on how this works, see `certbot --help manual`.
* Added a `--cert-name` flag for specifying the name to use for the
certificate in Certbot's configuration directory. Using this flag in
combination with `-d/--domains`, a user can easily request a new
certificate with different domains and save it with the name provided by
`--cert-name`. Additionally, `--cert-name` can be used to select a
certificate with the `certonly` and `run` subcommands so a full list of
domains in the certificate does not have to be provided.
* Added subcommand `certificates` for listing the certificates managed by
Certbot and their properties.
* Added the `delete` subcommand for removing certificates managed by Certbot
from the configuration directory.
* Certbot now supports requesting internationalized domain names (IDNs).
* Hooks provided to Certbot are now saved to be reused during renewal.
If you run Certbot with `--pre-hook`, `--renew-hook`, or `--post-hook`
flags when obtaining a certificate, the provided commands will
automatically be saved and executed again when renewing the certificate.
A pre-hook and/or post-hook can also be given to the `certbot renew`
command either on the command line or in a [configuration
file](https://certbot.eff.org/docs/using.html#configuration-file) to run
an additional command before/after any certificate is renewed. Hooks
will only be run if a certificate is renewed.
* Support Busybox in certbot-auto.

### Changed

* Recategorized `-h/--help` output to improve documentation and
discoverability.

### Removed

* Removed the ncurses interface. This change solves problems people
were having on many systems, reduces the number of Certbot
dependencies, and simplifies our code. Certbot's only interface now is
the text interface which was available by providing `-t/--text` to
earlier versions of Certbot.

### Fixed

* Many small bug fixes.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.10.0is%3Aclosed

## 0.9.3 - 2016-10-13

### Added

* The Apache plugin uses information about your OS to help determine the
layout of your Apache configuration directory. We added a patch to
ensure this code behaves the same way when testing on different systems
as the tests were failing in some cases.

### Changed

* Certbot adopted more conservative behavior about reporting a needed port as
unavailable when using the standalone plugin.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/27?closed=1

## 0.9.2 - 2016-10-12

### Added

* Certbot stopped requiring that all possibly required ports are available when
using the standalone plugin. It now only verifies that the ports are available
when they are necessary.

### Fixed

* Certbot now verifies that our optional dependencies version matches what is
required by Certbot.
* Certnot now properly copies the `ssl on;` directives as necessary when
performing domain validation in the Nginx plugin.
* Fixed problem where symlinks were becoming files when they were
packaged, causing errors during testing and OS packaging.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/26?closed=1

## 0.9.1 - 2016-10-06

### Fixed

* Fixed a bug that was introduced in version 0.9.0 where the command
line flag -q/--quiet wasn't respected in some cases.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/milestone/25?closed=1

## 0.9.0 - 2016-10-05

### Added

* Added an alpha version of the Nginx plugin. This plugin fully automates the
process of obtaining and installing certificates with Nginx.
Additionally, it is able to automatically configure security
enhancements such as an HTTP to HTTPS redirect and OCSP stapling. To use
this plugin, you must have the `certbot-nginx` package installed (which
is installed automatically when using `certbot-auto`) and provide
`--nginx` on the command line. This plugin is still in its early stages
so we recommend you use it with some caution and make sure you have a
backup of your Nginx configuration.
* Added support for the `DNS` challenge in the `acme` library and `DNS` in
Certbot's `manual` plugin. This allows you to create DNS records to
prove to Let's Encrypt you control the requested domain name. To use
this feature, include `--manual --preferred-challenges dns` on the
command line.
* Certbot now helps with enabling Extra Packages for Enterprise Linux (EPEL) on
CentOS 6 when using `certbot-auto`. To use `certbot-auto` on CentOS 6,
the EPEL repository has to be enabled. `certbot-auto` will now prompt
users asking them if they would like the script to enable this for them
automatically. This is done without prompting users when using
`letsencrypt-auto` or if `-n/--non-interactive/--noninteractive` is
included on the command line.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.9.0+is%3Aclosed

## 0.8.1 - 2016-06-14

### Added

* Certbot now preserves a certificate's common name when using `renew`.
* Certbot now saves webroot values for renewal when they are entered interactively.
* Certbot now gracefully reports that the Apache plugin isn't usable when Augeas is not installed.
* Added experimental support for Mageia has been added to `certbot-auto`.

### Fixed

* Fixed problems with an invalid user-agent string on OS X.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.8.1+

## 0.8.0 - 2016-06-02

### Added

* Added the `register` subcommand which can be used to register an account
with the Let's Encrypt CA.
* You can now run `certbot register --update-registration` to
change the e-mail address associated with your registration.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue+milestone%3A0.8.0+

## 0.7.0 - 2016-05-27

### Added

* Added `--must-staple` to request certificates from Let's Encrypt
with the OCSP must staple extension.
* Certbot now automatically configures OSCP stapling for Apache.
* Certbot now allows requesting certificates for domains found in the common name
of a custom CSR.

### Fixed

* Fixed a number of miscellaneous bugs

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=milestone%3A0.7.0+is%3Aissue

## 0.6.0 - 2016-05-12

### Added

* Versioned the datetime dependency in setup.py.

### Changed

* Renamed the client from `letsencrypt` to `certbot`.

### Fixed

* Fixed a small json deserialization error.
* Certbot now preserves domain order in generated CSRs.
* Fixed some minor bugs.

More details about these changes can be found on our GitHub repo:
https://github.com/certbot/certbot/issues?q=is%3Aissue%20milestone%3A0.6.0%20is%3Aclosed%20

## 0.5.0 - 2016-04-05

### Added

* Added the ability to use the webroot plugin interactively.
* Added the flags --pre-hook, --post-hook, and --renew-hook which can be used with
the renew subcommand to register shell commands to run in response to
renewal events. Pre-hook commands will be run before any certs are
renewed, post-hook commands will be run after any certs are renewed,
and renew-hook commands will be run after each cert is renewed. If no
certs are due for renewal, no command is run.
* Added a -q/--quiet flag which silences all output except errors.
* Added an --allow-subset-of-domains flag which can be used with the renew
command to prevent renewal failures for a subset of the requested
domains from causing the client to exit.

### Changed

* Certbot now uses renewal configuration files. In /etc/letsencrypt/renewal
by default, these files can be used to control what parameters are
used when renewing a specific certificate.

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=milestone%3A0.5.0+is%3Aissue

## 0.4.2 - 2016-03-03

### Fixed

* Resolved problems encountered when compiling letsencrypt
against the new OpenSSL release.
* Fixed problems encountered when using `letsencrypt renew` with configuration files
from the private beta.

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=is%3Aissue+milestone%3A0.4.2

## 0.4.1 - 2016-02-29

### Fixed

* Fixed Apache parsing errors encountered with some configurations.
* Fixed Werkzeug dependency problems encountered on some Red Hat systems.
* Fixed bootstrapping failures when using letsencrypt-auto with --no-self-upgrade.
* Fixed problems with parsing renewal config files from private beta.

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=is:issue+milestone:0.4.1

## 0.4.0 - 2016-02-10

### Added

* Added the verb/subcommand `renew` which can be used to renew your existing
certificates as they approach expiration. Running `letsencrypt renew`
will examine all existing certificate lineages and determine if any are
less than 30 days from expiration. If so, the client will use the
settings provided when you previously obtained the certificate to renew
it. The subcommand finishes by printing a summary of which renewals were
successful, failed, or not yet due.
* Added a `--dry-run` flag to help with testing configuration
without affecting production rate limits. Currently supported by the
`renew` and `certonly` subcommands, providing `--dry-run` on the command
line will obtain certificates from the staging server without saving the
resulting certificates to disk.
* Added major improvements to letsencrypt-auto. This script
has been rewritten to include full support for Python 2.6, the ability
for letsencrypt-auto to update itself, and improvements to the
stability, security, and performance of the script.
* Added support for Apache 2.2 to the Apache plugin.

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=is%3Aissue+milestone%3A0.4.0

## 0.3.0 - 2016-01-27

### Added

* Added a non-interactive mode which can be enabled by including `-n` or
`--non-interactive` on the command line. This can be used to guarantee
the client will not prompt when run automatically using cron/systemd.
* Added preparation for the new letsencrypt-auto script. Over the past
couple months, we've been working on increasing the reliability and
security of letsencrypt-auto. A number of changes landed in this
release to prepare for the new version of this script.

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=is%3Aissue+milestone%3A0.3.0

## 0.2.0 - 2016-01-14

### Added

* Added Apache plugin support for non-Debian based systems. Support has been
added for modern Red Hat based systems such as Fedora 23, Red Hat 7,
and CentOS 7 running Apache 2.4. In theory, this plugin should be
able to be configured to run on any Unix-like OS running Apache 2.4.
* Relaxed PyOpenSSL version requirements. This adds support for systems
with PyOpenSSL versions 0.13 or 0.14.
* Improved error messages from the client.

### Fixed

* Resolved issues with the Apache plugin enabling an HTTP to HTTPS
redirect on some systems.

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=is%3Aissue+milestone%3A0.2.0

## 0.1.1 - 2015-12-15

### Added

* Added a check that avoids attempting to issue for unqualified domain names like
"localhost".

### Fixed

* Fixed a confusing UI path that caused some users to repeatedly renew
their certs while experimenting with the client, in some cases hitting
issuance rate limits.
* Fixed numerous Apache configuration parser problems
* Fixed --webroot permission handling for non-root users

More details about these changes can be found on our GitHub repo:
https://github.com/letsencrypt/letsencrypt/issues?q=milestone%3A0.1.1

OHA YOOOO